rebuild
This commit is contained in:
parent
95b69048d9
commit
90ba0c4647
2299
STM32MP157AAA3/.metadata/.ide.log
Normal file
2299
STM32MP157AAA3/.metadata/.ide.log
Normal file
File diff suppressed because one or more lines are too long
0
STM32MP157AAA3/.metadata/.lock
Normal file
0
STM32MP157AAA3/.metadata/.lock
Normal file
46
STM32MP157AAA3/.metadata/.log
Normal file
46
STM32MP157AAA3/.metadata/.log
Normal file
@ -0,0 +1,46 @@
|
||||
!SESSION 2025-03-11 21:15:32.015 -----------------------------------------------
|
||||
eclipse.buildId=Version 1.18.0
|
||||
java.version=21.0.3
|
||||
java.vendor=Eclipse Adoptium
|
||||
BootLoader constants: OS=win32, ARCH=x86_64, WS=win32, NL=zh_CN
|
||||
Command-line arguments: -os win32 -ws win32 -arch x86_64
|
||||
|
||||
!ENTRY com.st.stm32cube.ide.mcu.informationcenter 4 4 2025-03-11 21:15:36.104
|
||||
!MESSAGE CubeMX plugin appears to be active, Log4j initialization might be too late.
|
||||
|
||||
!ENTRY com.st.stm32cube.ide.mcu.informationcenter 1 1 2025-03-11 21:15:36.108
|
||||
!MESSAGE Log4j2 initialized with config file D:\Git\Gitea\STM32\STM32MP157AAA3\.metadata\.log4j2.xml
|
||||
|
||||
!ENTRY com.st.stm32cube.ide.mcu.ide 1 1 2025-03-11 21:15:43.974
|
||||
!MESSAGE Started RMI Server, listening on port 41337
|
||||
|
||||
!ENTRY org.eclipse.cdt.core 1 0 2025-03-11 21:17:20.123
|
||||
!MESSAGE Indexed 'Cortex-M4 3-1_CM4' (18 sources, 78 headers) in 2.92 sec: 6,633 declarations; 32,645 references; 0 unresolved inclusions; 1 syntax errors; 2 unresolved names (0.0051%)
|
||||
|
||||
!ENTRY org.eclipse.cdt.core 1 0 2025-03-11 21:40:18.094
|
||||
!MESSAGE Indexed 'Cortex-M4 3-2_CM4' (18 sources, 78 headers) in 2.02 sec: 6,633 declarations; 32,645 references; 0 unresolved inclusions; 1 syntax errors; 2 unresolved names (0.0051%)
|
||||
|
||||
!ENTRY org.eclipse.cdt.core 1 0 2025-03-11 21:45:09.910
|
||||
!MESSAGE Indexed 'Cortex-M4 3-3_CM4' (18 sources, 78 headers) in 1.98 sec: 6,633 declarations; 32,645 references; 0 unresolved inclusions; 1 syntax errors; 2 unresolved names (0.0051%)
|
||||
|
||||
!ENTRY org.eclipse.cdt.core 1 0 2025-03-11 21:51:57.935
|
||||
!MESSAGE Indexed 'Cortex-M4 3-4_CM4' (18 sources, 78 headers) in 1.67 sec: 6,633 declarations; 32,645 references; 0 unresolved inclusions; 1 syntax errors; 2 unresolved names (0.0051%)
|
||||
!SESSION 2025-03-11 22:12:03.742 -----------------------------------------------
|
||||
eclipse.buildId=Version 1.18.0
|
||||
java.version=21.0.3
|
||||
java.vendor=Eclipse Adoptium
|
||||
BootLoader constants: OS=win32, ARCH=x86_64, WS=win32, NL=zh_CN
|
||||
Framework arguments: D:\Git\Gitea\STM32\STM32MP157AAA3\Cortex-M4 3-1\.project
|
||||
Command-line arguments: -os win32 -ws win32 -arch x86_64 D:\Git\Gitea\STM32\STM32MP157AAA3\Cortex-M4 3-1\.project
|
||||
|
||||
!ENTRY com.st.stm32cube.ide.mcu.informationcenter 4 4 2025-03-11 22:12:07.514
|
||||
!MESSAGE CubeMX plugin appears to be active, Log4j initialization might be too late.
|
||||
|
||||
!ENTRY com.st.stm32cube.ide.mcu.informationcenter 1 1 2025-03-11 22:12:07.515
|
||||
!MESSAGE Log4j2 initialized with config file D:\Git\Gitea\STM32\STM32MP157AAA3\.metadata\.log4j2.xml
|
||||
|
||||
!ENTRY com.st.stm32cube.ide.mcu.ide 1 1 2025-03-11 22:12:18.502
|
||||
!MESSAGE Started RMI Server, listening on port 41337
|
||||
|
||||
!ENTRY org.eclipse.cdt.core 1 0 2025-03-11 22:12:20.445
|
||||
!MESSAGE Indexed 'Cortex-M4 3-1_CM4' (18 sources, 78 headers) in 1.51 sec: 6,639 declarations; 32,779 references; 0 unresolved inclusions; 1 syntax errors; 2 unresolved names (0.0051%)
|
||||
18
STM32MP157AAA3/.metadata/.log4j2.xml
Normal file
18
STM32MP157AAA3/.metadata/.log4j2.xml
Normal file
@ -0,0 +1,18 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<Configuration status="info">
|
||||
<ThresholdFilter level="INFO"/>
|
||||
<Appenders>
|
||||
<RollingFile name="DEBUGFILE" fileName="D:/Git/Gitea/STM32/STM32MP157AAA3/.metadata/.ide.log" filePattern="D:/Git/Gitea/STM32/STM32MP157AAA3/.metadata/.ide.log-%d{yyyy-MM-dd}.log">
|
||||
<PatternLayout pattern="%d{yyyy-MM-dd HH:mm:ss,SSS} [%p] %c{1}:%L - %m%n" />
|
||||
<Policies>
|
||||
<TimeBasedTriggeringPolicy interval="1" modulate="true" />
|
||||
<SizeBasedTriggeringPolicy size="50MB"/>
|
||||
</Policies>
|
||||
</RollingFile>
|
||||
</Appenders>
|
||||
<Loggers>
|
||||
<Root level="ALL">
|
||||
<AppenderRef ref="DEBUGFILE" />
|
||||
</Root>
|
||||
</Loggers>
|
||||
</Configuration>
|
||||
@ -0,0 +1 @@
|
||||
*** SESSION 3月 11, 2025 21:15:34.406 -------------------------------------------
|
||||
Binary file not shown.
File diff suppressed because one or more lines are too long
Binary file not shown.
File diff suppressed because one or more lines are too long
Binary file not shown.
File diff suppressed because one or more lines are too long
Binary file not shown.
File diff suppressed because one or more lines are too long
@ -0,0 +1 @@
|
||||
|
||||
@ -0,0 +1 @@
|
||||
|
||||
@ -0,0 +1,5 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<section name="Workbench">
|
||||
<section name="org.eclipse.cdt.internal.ui.MakeView">
|
||||
</section>
|
||||
</section>
|
||||
@ -0,0 +1,17 @@
|
||||
21:39:01 **** Incremental Build of configuration Debug for project Cortex-M4 3-1_CM4 ****
|
||||
make -j32 all
|
||||
arm-none-eabi-gcc "../Core/Src/main.c" -mcpu=cortex-m4 -std=gnu11 -g3 -DDEBUG -DCORE_CM4 -DUSE_HAL_DRIVER -DSTM32MP157Axx -c -I../Core/Inc -I../../Drivers/STM32MP1xx_HAL_Driver/Inc -I../../Drivers/STM32MP1xx_HAL_Driver/Inc/Legacy -I../../Drivers/CMSIS/Device/ST/STM32MP1xx/Include -I../../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"Core/Src/main.d" -MT"Core/Src/main.o" --specs=nano.specs -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb -o "Core/Src/main.o"
|
||||
arm-none-eabi-gcc -o "Cortex-M4 3-1_CM4.elf" @"objects.list" -mcpu=cortex-m4 -T"D:\Git\Gitea\STM32\STM32MP157AAA3\Cortex-M4 3-1\CM4\STM32MP157AAAX_RAM.ld" --specs=nosys.specs -Wl,-Map="Cortex-M4 3-1_CM4.map" -Wl,--gc-sections -static --specs=nano.specs -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb -Wl,--start-group -lc -lm -Wl,--end-group
|
||||
Finished building target: Cortex-M4 3-1_CM4.elf
|
||||
|
||||
arm-none-eabi-size Cortex-M4\ 3-1_CM4.elf
|
||||
arm-none-eabi-objdump -h -S Cortex-M4\ 3-1_CM4.elf > "Cortex-M4 3-1_CM4.list"
|
||||
text data bss dec hex filename
|
||||
10816 12 1572 12400 3070 Cortex-M4 3-1_CM4.elf
|
||||
Finished building: default.size.stdout
|
||||
|
||||
Finished building: Cortex-M4 3-1_CM4.list
|
||||
|
||||
|
||||
21:39:02 Build Finished. 0 errors, 0 warnings. (took 755ms)
|
||||
|
||||
@ -0,0 +1,17 @@
|
||||
21:43:52 **** Incremental Build of configuration Debug for project Cortex-M4 3-2_CM4 ****
|
||||
make -j32 all
|
||||
arm-none-eabi-gcc "../Core/Src/main.c" -mcpu=cortex-m4 -std=gnu11 -g3 -DDEBUG -DCORE_CM4 -DUSE_HAL_DRIVER -DSTM32MP157Axx -c -I../Core/Inc -I../../Drivers/STM32MP1xx_HAL_Driver/Inc -I../../Drivers/STM32MP1xx_HAL_Driver/Inc/Legacy -I../../Drivers/CMSIS/Device/ST/STM32MP1xx/Include -I../../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"Core/Src/main.d" -MT"Core/Src/main.o" --specs=nano.specs -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb -o "Core/Src/main.o"
|
||||
arm-none-eabi-gcc -o "Cortex-M4 3-2_CM4.elf" @"objects.list" -mcpu=cortex-m4 -T"D:\Git\Gitea\STM32\STM32MP157AAA3\Cortex-M4 3-2\CM4\STM32MP157AAAX_RAM.ld" --specs=nosys.specs -Wl,-Map="Cortex-M4 3-2_CM4.map" -Wl,--gc-sections -static --specs=nano.specs -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb -Wl,--start-group -lc -lm -Wl,--end-group
|
||||
Finished building target: Cortex-M4 3-2_CM4.elf
|
||||
|
||||
arm-none-eabi-size Cortex-M4\ 3-2_CM4.elf
|
||||
arm-none-eabi-objdump -h -S Cortex-M4\ 3-2_CM4.elf > "Cortex-M4 3-2_CM4.list"
|
||||
text data bss dec hex filename
|
||||
10812 12 1572 12396 306c Cortex-M4 3-2_CM4.elf
|
||||
Finished building: default.size.stdout
|
||||
|
||||
Finished building: Cortex-M4 3-2_CM4.list
|
||||
|
||||
|
||||
21:43:53 Build Finished. 0 errors, 0 warnings. (took 803ms)
|
||||
|
||||
@ -0,0 +1,35 @@
|
||||
21:51:13 **** Build of configuration Debug for project Cortex-M4 3-3_CM4 ****
|
||||
make -j32 all
|
||||
arm-none-eabi-gcc "D:/Git/Gitea/STM32/STM32MP157AAA3/Cortex-M4 3-3/Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal.c" -mcpu=cortex-m4 -std=gnu11 -g3 -DDEBUG -DCORE_CM4 -DUSE_HAL_DRIVER -DSTM32MP157Axx -c -I../Core/Inc -I../../Drivers/STM32MP1xx_HAL_Driver/Inc -I../../Drivers/STM32MP1xx_HAL_Driver/Inc/Legacy -I../../Drivers/CMSIS/Device/ST/STM32MP1xx/Include -I../../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"Drivers/STM32MP1xx_HAL_Driver/stm32mp1xx_hal.d" -MT"Drivers/STM32MP1xx_HAL_Driver/stm32mp1xx_hal.o" --specs=nano.specs -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb -o "Drivers/STM32MP1xx_HAL_Driver/stm32mp1xx_hal.o"
|
||||
arm-none-eabi-gcc "D:/Git/Gitea/STM32/STM32MP157AAA3/Cortex-M4 3-3/Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_cortex.c" -mcpu=cortex-m4 -std=gnu11 -g3 -DDEBUG -DCORE_CM4 -DUSE_HAL_DRIVER -DSTM32MP157Axx -c -I../Core/Inc -I../../Drivers/STM32MP1xx_HAL_Driver/Inc -I../../Drivers/STM32MP1xx_HAL_Driver/Inc/Legacy -I../../Drivers/CMSIS/Device/ST/STM32MP1xx/Include -I../../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"Drivers/STM32MP1xx_HAL_Driver/stm32mp1xx_hal_cortex.d" -MT"Drivers/STM32MP1xx_HAL_Driver/stm32mp1xx_hal_cortex.o" --specs=nano.specs -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb -o "Drivers/STM32MP1xx_HAL_Driver/stm32mp1xx_hal_cortex.o"
|
||||
arm-none-eabi-gcc "D:/Git/Gitea/STM32/STM32MP157AAA3/Cortex-M4 3-3/Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_dma.c" -mcpu=cortex-m4 -std=gnu11 -g3 -DDEBUG -DCORE_CM4 -DUSE_HAL_DRIVER -DSTM32MP157Axx -c -I../Core/Inc -I../../Drivers/STM32MP1xx_HAL_Driver/Inc -I../../Drivers/STM32MP1xx_HAL_Driver/Inc/Legacy -I../../Drivers/CMSIS/Device/ST/STM32MP1xx/Include -I../../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"Drivers/STM32MP1xx_HAL_Driver/stm32mp1xx_hal_dma.d" -MT"Drivers/STM32MP1xx_HAL_Driver/stm32mp1xx_hal_dma.o" --specs=nano.specs -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb -o "Drivers/STM32MP1xx_HAL_Driver/stm32mp1xx_hal_dma.o"
|
||||
arm-none-eabi-gcc "D:/Git/Gitea/STM32/STM32MP157AAA3/Cortex-M4 3-3/Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_dma_ex.c" -mcpu=cortex-m4 -std=gnu11 -g3 -DDEBUG -DCORE_CM4 -DUSE_HAL_DRIVER -DSTM32MP157Axx -c -I../Core/Inc -I../../Drivers/STM32MP1xx_HAL_Driver/Inc -I../../Drivers/STM32MP1xx_HAL_Driver/Inc/Legacy -I../../Drivers/CMSIS/Device/ST/STM32MP1xx/Include -I../../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"Drivers/STM32MP1xx_HAL_Driver/stm32mp1xx_hal_dma_ex.d" -MT"Drivers/STM32MP1xx_HAL_Driver/stm32mp1xx_hal_dma_ex.o" --specs=nano.specs -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb -o "Drivers/STM32MP1xx_HAL_Driver/stm32mp1xx_hal_dma_ex.o"
|
||||
arm-none-eabi-gcc "D:/Git/Gitea/STM32/STM32MP157AAA3/Cortex-M4 3-3/Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_exti.c" -mcpu=cortex-m4 -std=gnu11 -g3 -DDEBUG -DCORE_CM4 -DUSE_HAL_DRIVER -DSTM32MP157Axx -c -I../Core/Inc -I../../Drivers/STM32MP1xx_HAL_Driver/Inc -I../../Drivers/STM32MP1xx_HAL_Driver/Inc/Legacy -I../../Drivers/CMSIS/Device/ST/STM32MP1xx/Include -I../../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"Drivers/STM32MP1xx_HAL_Driver/stm32mp1xx_hal_exti.d" -MT"Drivers/STM32MP1xx_HAL_Driver/stm32mp1xx_hal_exti.o" --specs=nano.specs -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb -o "Drivers/STM32MP1xx_HAL_Driver/stm32mp1xx_hal_exti.o"
|
||||
arm-none-eabi-gcc "D:/Git/Gitea/STM32/STM32MP157AAA3/Cortex-M4 3-3/Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_gpio.c" -mcpu=cortex-m4 -std=gnu11 -g3 -DDEBUG -DCORE_CM4 -DUSE_HAL_DRIVER -DSTM32MP157Axx -c -I../Core/Inc -I../../Drivers/STM32MP1xx_HAL_Driver/Inc -I../../Drivers/STM32MP1xx_HAL_Driver/Inc/Legacy -I../../Drivers/CMSIS/Device/ST/STM32MP1xx/Include -I../../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"Drivers/STM32MP1xx_HAL_Driver/stm32mp1xx_hal_gpio.d" -MT"Drivers/STM32MP1xx_HAL_Driver/stm32mp1xx_hal_gpio.o" --specs=nano.specs -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb -o "Drivers/STM32MP1xx_HAL_Driver/stm32mp1xx_hal_gpio.o"
|
||||
arm-none-eabi-gcc "D:/Git/Gitea/STM32/STM32MP157AAA3/Cortex-M4 3-3/Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_hsem.c" -mcpu=cortex-m4 -std=gnu11 -g3 -DDEBUG -DCORE_CM4 -DUSE_HAL_DRIVER -DSTM32MP157Axx -c -I../Core/Inc -I../../Drivers/STM32MP1xx_HAL_Driver/Inc -I../../Drivers/STM32MP1xx_HAL_Driver/Inc/Legacy -I../../Drivers/CMSIS/Device/ST/STM32MP1xx/Include -I../../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"Drivers/STM32MP1xx_HAL_Driver/stm32mp1xx_hal_hsem.d" -MT"Drivers/STM32MP1xx_HAL_Driver/stm32mp1xx_hal_hsem.o" --specs=nano.specs -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb -o "Drivers/STM32MP1xx_HAL_Driver/stm32mp1xx_hal_hsem.o"
|
||||
arm-none-eabi-gcc "D:/Git/Gitea/STM32/STM32MP157AAA3/Cortex-M4 3-3/Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_mdma.c" -mcpu=cortex-m4 -std=gnu11 -g3 -DDEBUG -DCORE_CM4 -DUSE_HAL_DRIVER -DSTM32MP157Axx -c -I../Core/Inc -I../../Drivers/STM32MP1xx_HAL_Driver/Inc -I../../Drivers/STM32MP1xx_HAL_Driver/Inc/Legacy -I../../Drivers/CMSIS/Device/ST/STM32MP1xx/Include -I../../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"Drivers/STM32MP1xx_HAL_Driver/stm32mp1xx_hal_mdma.d" -MT"Drivers/STM32MP1xx_HAL_Driver/stm32mp1xx_hal_mdma.o" --specs=nano.specs -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb -o "Drivers/STM32MP1xx_HAL_Driver/stm32mp1xx_hal_mdma.o"
|
||||
arm-none-eabi-gcc "D:/Git/Gitea/STM32/STM32MP157AAA3/Cortex-M4 3-3/Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_pwr.c" -mcpu=cortex-m4 -std=gnu11 -g3 -DDEBUG -DCORE_CM4 -DUSE_HAL_DRIVER -DSTM32MP157Axx -c -I../Core/Inc -I../../Drivers/STM32MP1xx_HAL_Driver/Inc -I../../Drivers/STM32MP1xx_HAL_Driver/Inc/Legacy -I../../Drivers/CMSIS/Device/ST/STM32MP1xx/Include -I../../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"Drivers/STM32MP1xx_HAL_Driver/stm32mp1xx_hal_pwr.d" -MT"Drivers/STM32MP1xx_HAL_Driver/stm32mp1xx_hal_pwr.o" --specs=nano.specs -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb -o "Drivers/STM32MP1xx_HAL_Driver/stm32mp1xx_hal_pwr.o"
|
||||
arm-none-eabi-gcc "D:/Git/Gitea/STM32/STM32MP157AAA3/Cortex-M4 3-3/Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_pwr_ex.c" -mcpu=cortex-m4 -std=gnu11 -g3 -DDEBUG -DCORE_CM4 -DUSE_HAL_DRIVER -DSTM32MP157Axx -c -I../Core/Inc -I../../Drivers/STM32MP1xx_HAL_Driver/Inc -I../../Drivers/STM32MP1xx_HAL_Driver/Inc/Legacy -I../../Drivers/CMSIS/Device/ST/STM32MP1xx/Include -I../../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"Drivers/STM32MP1xx_HAL_Driver/stm32mp1xx_hal_pwr_ex.d" -MT"Drivers/STM32MP1xx_HAL_Driver/stm32mp1xx_hal_pwr_ex.o" --specs=nano.specs -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb -o "Drivers/STM32MP1xx_HAL_Driver/stm32mp1xx_hal_pwr_ex.o"
|
||||
arm-none-eabi-gcc "D:/Git/Gitea/STM32/STM32MP157AAA3/Cortex-M4 3-3/Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_rcc.c" -mcpu=cortex-m4 -std=gnu11 -g3 -DDEBUG -DCORE_CM4 -DUSE_HAL_DRIVER -DSTM32MP157Axx -c -I../Core/Inc -I../../Drivers/STM32MP1xx_HAL_Driver/Inc -I../../Drivers/STM32MP1xx_HAL_Driver/Inc/Legacy -I../../Drivers/CMSIS/Device/ST/STM32MP1xx/Include -I../../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"Drivers/STM32MP1xx_HAL_Driver/stm32mp1xx_hal_rcc.d" -MT"Drivers/STM32MP1xx_HAL_Driver/stm32mp1xx_hal_rcc.o" --specs=nano.specs -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb -o "Drivers/STM32MP1xx_HAL_Driver/stm32mp1xx_hal_rcc.o"
|
||||
arm-none-eabi-gcc "D:/Git/Gitea/STM32/STM32MP157AAA3/Cortex-M4 3-3/Drivers/STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_rcc_ex.c" -mcpu=cortex-m4 -std=gnu11 -g3 -DDEBUG -DCORE_CM4 -DUSE_HAL_DRIVER -DSTM32MP157Axx -c -I../Core/Inc -I../../Drivers/STM32MP1xx_HAL_Driver/Inc -I../../Drivers/STM32MP1xx_HAL_Driver/Inc/Legacy -I../../Drivers/CMSIS/Device/ST/STM32MP1xx/Include -I../../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"Drivers/STM32MP1xx_HAL_Driver/stm32mp1xx_hal_rcc_ex.d" -MT"Drivers/STM32MP1xx_HAL_Driver/stm32mp1xx_hal_rcc_ex.o" --specs=nano.specs -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb -o "Drivers/STM32MP1xx_HAL_Driver/stm32mp1xx_hal_rcc_ex.o"
|
||||
arm-none-eabi-gcc -mcpu=cortex-m4 -g3 -DDEBUG -c -x assembler-with-cpp -MMD -MP -MF"Core/Startup/startup_stm32mp157aaax.d" -MT"Core/Startup/startup_stm32mp157aaax.o" --specs=nano.specs -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb -o "Core/Startup/startup_stm32mp157aaax.o" "../Core/Startup/startup_stm32mp157aaax.s"
|
||||
arm-none-eabi-gcc "../Core/Src/main.c" -mcpu=cortex-m4 -std=gnu11 -g3 -DDEBUG -DCORE_CM4 -DUSE_HAL_DRIVER -DSTM32MP157Axx -c -I../Core/Inc -I../../Drivers/STM32MP1xx_HAL_Driver/Inc -I../../Drivers/STM32MP1xx_HAL_Driver/Inc/Legacy -I../../Drivers/CMSIS/Device/ST/STM32MP1xx/Include -I../../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"Core/Src/main.d" -MT"Core/Src/main.o" --specs=nano.specs -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb -o "Core/Src/main.o"
|
||||
arm-none-eabi-gcc "../Core/Src/stm32mp1xx_hal_msp.c" -mcpu=cortex-m4 -std=gnu11 -g3 -DDEBUG -DCORE_CM4 -DUSE_HAL_DRIVER -DSTM32MP157Axx -c -I../Core/Inc -I../../Drivers/STM32MP1xx_HAL_Driver/Inc -I../../Drivers/STM32MP1xx_HAL_Driver/Inc/Legacy -I../../Drivers/CMSIS/Device/ST/STM32MP1xx/Include -I../../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"Core/Src/stm32mp1xx_hal_msp.d" -MT"Core/Src/stm32mp1xx_hal_msp.o" --specs=nano.specs -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb -o "Core/Src/stm32mp1xx_hal_msp.o"
|
||||
arm-none-eabi-gcc "../Core/Src/stm32mp1xx_it.c" -mcpu=cortex-m4 -std=gnu11 -g3 -DDEBUG -DCORE_CM4 -DUSE_HAL_DRIVER -DSTM32MP157Axx -c -I../Core/Inc -I../../Drivers/STM32MP1xx_HAL_Driver/Inc -I../../Drivers/STM32MP1xx_HAL_Driver/Inc/Legacy -I../../Drivers/CMSIS/Device/ST/STM32MP1xx/Include -I../../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"Core/Src/stm32mp1xx_it.d" -MT"Core/Src/stm32mp1xx_it.o" --specs=nano.specs -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb -o "Core/Src/stm32mp1xx_it.o"
|
||||
arm-none-eabi-gcc "../Core/Src/syscalls.c" -mcpu=cortex-m4 -std=gnu11 -g3 -DDEBUG -DCORE_CM4 -DUSE_HAL_DRIVER -DSTM32MP157Axx -c -I../Core/Inc -I../../Drivers/STM32MP1xx_HAL_Driver/Inc -I../../Drivers/STM32MP1xx_HAL_Driver/Inc/Legacy -I../../Drivers/CMSIS/Device/ST/STM32MP1xx/Include -I../../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"Core/Src/syscalls.d" -MT"Core/Src/syscalls.o" --specs=nano.specs -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb -o "Core/Src/syscalls.o"
|
||||
arm-none-eabi-gcc "../Core/Src/sysmem.c" -mcpu=cortex-m4 -std=gnu11 -g3 -DDEBUG -DCORE_CM4 -DUSE_HAL_DRIVER -DSTM32MP157Axx -c -I../Core/Inc -I../../Drivers/STM32MP1xx_HAL_Driver/Inc -I../../Drivers/STM32MP1xx_HAL_Driver/Inc/Legacy -I../../Drivers/CMSIS/Device/ST/STM32MP1xx/Include -I../../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"Core/Src/sysmem.d" -MT"Core/Src/sysmem.o" --specs=nano.specs -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb -o "Core/Src/sysmem.o"
|
||||
arm-none-eabi-gcc "D:/Git/Gitea/STM32/STM32MP157AAA3/Cortex-M4 3-3/Common/System/system_stm32mp1xx.c" -mcpu=cortex-m4 -std=gnu11 -g3 -DDEBUG -DCORE_CM4 -DUSE_HAL_DRIVER -DSTM32MP157Axx -c -I../Core/Inc -I../../Drivers/STM32MP1xx_HAL_Driver/Inc -I../../Drivers/STM32MP1xx_HAL_Driver/Inc/Legacy -I../../Drivers/CMSIS/Device/ST/STM32MP1xx/Include -I../../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"Common/System/system_stm32mp1xx.d" -MT"Common/System/system_stm32mp1xx.o" --specs=nano.specs -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb -o "Common/System/system_stm32mp1xx.o"
|
||||
arm-none-eabi-gcc -o "Cortex-M4 3-3_CM4.elf" @"objects.list" -mcpu=cortex-m4 -T"D:\Git\Gitea\STM32\STM32MP157AAA3\Cortex-M4 3-3\CM4\STM32MP157AAAX_RAM.ld" --specs=nosys.specs -Wl,-Map="Cortex-M4 3-3_CM4.map" -Wl,--gc-sections -static --specs=nano.specs -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb -Wl,--start-group -lc -lm -Wl,--end-group
|
||||
Finished building target: Cortex-M4 3-3_CM4.elf
|
||||
|
||||
arm-none-eabi-size Cortex-M4\ 3-3_CM4.elf
|
||||
arm-none-eabi-objdump -h -S Cortex-M4\ 3-3_CM4.elf > "Cortex-M4 3-3_CM4.list"
|
||||
text data bss dec hex filename
|
||||
11100 12 1572 12684 318c Cortex-M4 3-3_CM4.elf
|
||||
Finished building: default.size.stdout
|
||||
|
||||
Finished building: Cortex-M4 3-3_CM4.list
|
||||
|
||||
|
||||
21:51:14 Build Finished. 0 errors, 0 warnings. (took 1s.368ms)
|
||||
|
||||
@ -0,0 +1,17 @@
|
||||
21:56:16 **** Incremental Build of configuration Debug for project Cortex-M4 3-4_CM4 ****
|
||||
make -j32 all
|
||||
arm-none-eabi-gcc "../Core/Src/main.c" -mcpu=cortex-m4 -std=gnu11 -g3 -DDEBUG -DCORE_CM4 -DUSE_HAL_DRIVER -DSTM32MP157Axx -c -I../Core/Inc -I../../Drivers/STM32MP1xx_HAL_Driver/Inc -I../../Drivers/STM32MP1xx_HAL_Driver/Inc/Legacy -I../../Drivers/CMSIS/Device/ST/STM32MP1xx/Include -I../../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"Core/Src/main.d" -MT"Core/Src/main.o" --specs=nano.specs -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb -o "Core/Src/main.o"
|
||||
arm-none-eabi-gcc -o "Cortex-M4 3-4_CM4.elf" @"objects.list" -mcpu=cortex-m4 -T"D:\Git\Gitea\STM32\STM32MP157AAA3\Cortex-M4 3-4\CM4\STM32MP157AAAX_RAM.ld" --specs=nosys.specs -Wl,-Map="Cortex-M4 3-4_CM4.map" -Wl,--gc-sections -static --specs=nano.specs -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb -Wl,--start-group -lc -lm -Wl,--end-group
|
||||
Finished building target: Cortex-M4 3-4_CM4.elf
|
||||
|
||||
arm-none-eabi-size Cortex-M4\ 3-4_CM4.elf
|
||||
arm-none-eabi-objdump -h -S Cortex-M4\ 3-4_CM4.elf > "Cortex-M4 3-4_CM4.list"
|
||||
text data bss dec hex filename
|
||||
10812 12 1572 12396 306c Cortex-M4 3-4_CM4.elf
|
||||
Finished building: default.size.stdout
|
||||
|
||||
Finished building: Cortex-M4 3-4_CM4.list
|
||||
|
||||
|
||||
21:56:16 Build Finished. 0 errors, 0 warnings. (took 754ms)
|
||||
|
||||
@ -0,0 +1,7 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<section name="Workbench">
|
||||
<section name="completion_proposal_size">
|
||||
</section>
|
||||
<section name="org.eclipse.cdt.ui.text.hover.CMacroExpansionExploration">
|
||||
</section>
|
||||
</section>
|
||||
@ -0,0 +1,14 @@
|
||||
21:56:16 **** Incremental Build of configuration Debug for project Cortex-M4 3-4_CM4 ****
|
||||
make -j32 all
|
||||
arm-none-eabi-gcc "../Core/Src/main.c" -mcpu=cortex-m4 -std=gnu11 -g3 -DDEBUG -DCORE_CM4 -DUSE_HAL_DRIVER -DSTM32MP157Axx -c -I../Core/Inc -I../../Drivers/STM32MP1xx_HAL_Driver/Inc -I../../Drivers/STM32MP1xx_HAL_Driver/Inc/Legacy -I../../Drivers/CMSIS/Device/ST/STM32MP1xx/Include -I../../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"Core/Src/main.d" -MT"Core/Src/main.o" --specs=nano.specs -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb -o "Core/Src/main.o"
|
||||
arm-none-eabi-gcc -o "Cortex-M4 3-4_CM4.elf" @"objects.list" -mcpu=cortex-m4 -T"D:\Git\Gitea\STM32\STM32MP157AAA3\Cortex-M4 3-4\CM4\STM32MP157AAAX_RAM.ld" --specs=nosys.specs -Wl,-Map="Cortex-M4 3-4_CM4.map" -Wl,--gc-sections -static --specs=nano.specs -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb -Wl,--start-group -lc -lm -Wl,--end-group
|
||||
Finished building target: Cortex-M4 3-4_CM4.elf
|
||||
|
||||
arm-none-eabi-size Cortex-M4\ 3-4_CM4.elf
|
||||
arm-none-eabi-objdump -h -S Cortex-M4\ 3-4_CM4.elf > "Cortex-M4 3-4_CM4.list"
|
||||
text data bss dec hex filename
|
||||
10812 12 1572 12396 306c Cortex-M4 3-4_CM4.elf
|
||||
Finished building: default.size.stdout
|
||||
|
||||
Finished building: Cortex-M4 3-4_CM4.list
|
||||
|
||||
@ -0,0 +1,224 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file : main.c
|
||||
* @brief : Main program body
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2025 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PTD */
|
||||
|
||||
/* USER CODE END PTD */
|
||||
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PD */
|
||||
|
||||
/* USER CODE END PD */
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PM */
|
||||
|
||||
/* USER CODE END PM */
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
|
||||
/* USER CODE BEGIN PV */
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
void SystemClock_Config(void);
|
||||
static void MX_GPIO_Init(void);
|
||||
/* USER CODE BEGIN PFP */
|
||||
|
||||
/* USER CODE END PFP */
|
||||
|
||||
/* Private user code ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/**
|
||||
* @brief The application entry point.
|
||||
* @retval int
|
||||
*/
|
||||
int main(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
||||
/* MCU Configuration--------------------------------------------------------*/
|
||||
|
||||
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
|
||||
HAL_Init();
|
||||
|
||||
/* USER CODE BEGIN Init */
|
||||
|
||||
/* USER CODE END Init */
|
||||
|
||||
if(IS_ENGINEERING_BOOT_MODE())
|
||||
{
|
||||
/* Configure the system clock */
|
||||
SystemClock_Config();
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN SysInit */
|
||||
|
||||
/* USER CODE END SysInit */
|
||||
|
||||
/* Initialize all configured peripherals */
|
||||
MX_GPIO_Init();
|
||||
/* USER CODE BEGIN 2 */
|
||||
|
||||
/* USER CODE END 2 */
|
||||
|
||||
/* Infinite loop */
|
||||
/* USER CODE BEGIN WHILE */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE END WHILE */
|
||||
|
||||
/* USER CODE BEGIN 3 */
|
||||
}
|
||||
/* USER CODE END 3 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief System Clock Configuration
|
||||
* @retval None
|
||||
*/
|
||||
void SystemClock_Config(void)
|
||||
{
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
||||
|
||||
/** Initializes the RCC Oscillators according to the specified parameters
|
||||
* in the RCC_OscInitTypeDef structure.
|
||||
*/
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
|
||||
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
|
||||
RCC_OscInitStruct.HSIDivValue = RCC_HSI_DIV1;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
|
||||
RCC_OscInitStruct.PLL2.PLLState = RCC_PLL_NONE;
|
||||
RCC_OscInitStruct.PLL3.PLLState = RCC_PLL_NONE;
|
||||
RCC_OscInitStruct.PLL4.PLLState = RCC_PLL_NONE;
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
/** RCC Clock Config
|
||||
*/
|
||||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_ACLK
|
||||
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2
|
||||
|RCC_CLOCKTYPE_PCLK3|RCC_CLOCKTYPE_PCLK4
|
||||
|RCC_CLOCKTYPE_PCLK5;
|
||||
RCC_ClkInitStruct.AXISSInit.AXI_Clock = RCC_AXISSOURCE_HSI;
|
||||
RCC_ClkInitStruct.AXISSInit.AXI_Div = RCC_AXI_DIV1;
|
||||
RCC_ClkInitStruct.MCUInit.MCU_Clock = RCC_MCUSSOURCE_HSI;
|
||||
RCC_ClkInitStruct.MCUInit.MCU_Div = RCC_MCU_DIV1;
|
||||
RCC_ClkInitStruct.APB4_Div = RCC_APB4_DIV1;
|
||||
RCC_ClkInitStruct.APB5_Div = RCC_APB5_DIV1;
|
||||
RCC_ClkInitStruct.APB1_Div = RCC_APB1_DIV1;
|
||||
RCC_ClkInitStruct.APB2_Div = RCC_APB2_DIV1;
|
||||
RCC_ClkInitStruct.APB3_Div = RCC_APB3_DIV1;
|
||||
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief GPIO Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_GPIO_Init(void)
|
||||
{
|
||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
/* USER CODE BEGIN MX_GPIO_Init_1 */
|
||||
|
||||
/* USER CODE END MX_GPIO_Init_1 */
|
||||
|
||||
/* GPIO Ports Clock Enable */
|
||||
__HAL_RCC_GPIOC_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOE_CLK_ENABLE();
|
||||
|
||||
/*Configure GPIO pin Output Level */
|
||||
HAL_GPIO_WritePin(GPIOC, GPIO_PIN_7, GPIO_PIN_RESET);
|
||||
|
||||
/*Configure GPIO pin : PC7 */
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_7;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pin : PE9 */
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_9;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
|
||||
|
||||
/* USER CODE BEGIN MX_GPIO_Init_2 */
|
||||
|
||||
/* USER CODE END MX_GPIO_Init_2 */
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 4 */
|
||||
|
||||
/* USER CODE END 4 */
|
||||
|
||||
/**
|
||||
* @brief This function is executed in case of error occurrence.
|
||||
* @retval None
|
||||
*/
|
||||
void Error_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN Error_Handler_Debug */
|
||||
/* User can add his own implementation to report the HAL error return state */
|
||||
__disable_irq();
|
||||
while (1)
|
||||
{
|
||||
}
|
||||
/* USER CODE END Error_Handler_Debug */
|
||||
}
|
||||
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief Reports the name of the source file and the source line number
|
||||
* where the assert_param error has occurred.
|
||||
* @param file: pointer to the source file name
|
||||
* @param line: assert_param error line source number
|
||||
* @retval None
|
||||
*/
|
||||
void assert_failed(uint8_t *file, uint32_t line)
|
||||
{
|
||||
/* USER CODE BEGIN 6 */
|
||||
/* User can add his own implementation to report the file name and line number,
|
||||
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
|
||||
/* USER CODE END 6 */
|
||||
}
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
@ -0,0 +1,2 @@
|
||||
66BE74F758C12D739921AEA421D593D3=0
|
||||
eclipse.preferences.version=1
|
||||
@ -0,0 +1,2 @@
|
||||
66BE74F758C12D739921AEA421D593D3=0
|
||||
eclipse.preferences.version=1
|
||||
@ -0,0 +1,4 @@
|
||||
2F62501ED4689FB349E356AB974DBE57=58DC80C130FF1F8D3F80A6490EE3F57C
|
||||
635E684B79701B039C64EA45C3F84D30=58DC80C130FF1F8D3F80A6490EE3F57C
|
||||
DC22A860405A8BF2F2C095E5B6529F12=1F098FDD630F96060A5BB9FD2B0116AC
|
||||
eclipse.preferences.version=1
|
||||
@ -0,0 +1,224 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file : main.c
|
||||
* @brief : Main program body
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2025 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PTD */
|
||||
|
||||
/* USER CODE END PTD */
|
||||
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PD */
|
||||
|
||||
/* USER CODE END PD */
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PM */
|
||||
|
||||
/* USER CODE END PM */
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
|
||||
/* USER CODE BEGIN PV */
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
void SystemClock_Config(void);
|
||||
static void MX_GPIO_Init(void);
|
||||
/* USER CODE BEGIN PFP */
|
||||
|
||||
/* USER CODE END PFP */
|
||||
|
||||
/* Private user code ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/**
|
||||
* @brief The application entry point.
|
||||
* @retval int
|
||||
*/
|
||||
int main(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
||||
/* MCU Configuration--------------------------------------------------------*/
|
||||
|
||||
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
|
||||
HAL_Init();
|
||||
|
||||
/* USER CODE BEGIN Init */
|
||||
|
||||
/* USER CODE END Init */
|
||||
|
||||
if(IS_ENGINEERING_BOOT_MODE())
|
||||
{
|
||||
/* Configure the system clock */
|
||||
SystemClock_Config();
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN SysInit */
|
||||
|
||||
/* USER CODE END SysInit */
|
||||
|
||||
/* Initialize all configured peripherals */
|
||||
MX_GPIO_Init();
|
||||
/* USER CODE BEGIN 2 */
|
||||
|
||||
/* USER CODE END 2 */
|
||||
|
||||
/* Infinite loop */
|
||||
/* USER CODE BEGIN WHILE */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE END WHILE */
|
||||
|
||||
/* USER CODE BEGIN 3 */
|
||||
}
|
||||
/* USER CODE END 3 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief System Clock Configuration
|
||||
* @retval None
|
||||
*/
|
||||
void SystemClock_Config(void)
|
||||
{
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
||||
|
||||
/** Initializes the RCC Oscillators according to the specified parameters
|
||||
* in the RCC_OscInitTypeDef structure.
|
||||
*/
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
|
||||
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
|
||||
RCC_OscInitStruct.HSIDivValue = RCC_HSI_DIV1;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
|
||||
RCC_OscInitStruct.PLL2.PLLState = RCC_PLL_NONE;
|
||||
RCC_OscInitStruct.PLL3.PLLState = RCC_PLL_NONE;
|
||||
RCC_OscInitStruct.PLL4.PLLState = RCC_PLL_NONE;
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
/** RCC Clock Config
|
||||
*/
|
||||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_ACLK
|
||||
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2
|
||||
|RCC_CLOCKTYPE_PCLK3|RCC_CLOCKTYPE_PCLK4
|
||||
|RCC_CLOCKTYPE_PCLK5;
|
||||
RCC_ClkInitStruct.AXISSInit.AXI_Clock = RCC_AXISSOURCE_HSI;
|
||||
RCC_ClkInitStruct.AXISSInit.AXI_Div = RCC_AXI_DIV1;
|
||||
RCC_ClkInitStruct.MCUInit.MCU_Clock = RCC_MCUSSOURCE_HSI;
|
||||
RCC_ClkInitStruct.MCUInit.MCU_Div = RCC_MCU_DIV1;
|
||||
RCC_ClkInitStruct.APB4_Div = RCC_APB4_DIV1;
|
||||
RCC_ClkInitStruct.APB5_Div = RCC_APB5_DIV1;
|
||||
RCC_ClkInitStruct.APB1_Div = RCC_APB1_DIV1;
|
||||
RCC_ClkInitStruct.APB2_Div = RCC_APB2_DIV1;
|
||||
RCC_ClkInitStruct.APB3_Div = RCC_APB3_DIV1;
|
||||
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief GPIO Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_GPIO_Init(void)
|
||||
{
|
||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
/* USER CODE BEGIN MX_GPIO_Init_1 */
|
||||
|
||||
/* USER CODE END MX_GPIO_Init_1 */
|
||||
|
||||
/* GPIO Ports Clock Enable */
|
||||
__HAL_RCC_GPIOG_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||
|
||||
/*Configure GPIO pin Output Level */
|
||||
HAL_GPIO_WritePin(GPIOB, GPIO_PIN_6, GPIO_PIN_RESET);
|
||||
|
||||
/*Configure GPIO pin : PG0 */
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_0;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pin : PB6 */
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_6;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||
|
||||
/* USER CODE BEGIN MX_GPIO_Init_2 */
|
||||
|
||||
/* USER CODE END MX_GPIO_Init_2 */
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 4 */
|
||||
|
||||
/* USER CODE END 4 */
|
||||
|
||||
/**
|
||||
* @brief This function is executed in case of error occurrence.
|
||||
* @retval None
|
||||
*/
|
||||
void Error_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN Error_Handler_Debug */
|
||||
/* User can add his own implementation to report the HAL error return state */
|
||||
__disable_irq();
|
||||
while (1)
|
||||
{
|
||||
}
|
||||
/* USER CODE END Error_Handler_Debug */
|
||||
}
|
||||
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief Reports the name of the source file and the source line number
|
||||
* where the assert_param error has occurred.
|
||||
* @param file: pointer to the source file name
|
||||
* @param line: assert_param error line source number
|
||||
* @retval None
|
||||
*/
|
||||
void assert_failed(uint8_t *file, uint32_t line)
|
||||
{
|
||||
/* USER CODE BEGIN 6 */
|
||||
/* User can add his own implementation to report the file name and line number,
|
||||
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
|
||||
/* USER CODE END 6 */
|
||||
}
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
@ -0,0 +1,2 @@
|
||||
66BE74F758C12D739921AEA421D593D3=0
|
||||
eclipse.preferences.version=1
|
||||
@ -0,0 +1,240 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file : main.c
|
||||
* @brief : Main program body
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2025 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PTD */
|
||||
|
||||
/* USER CODE END PTD */
|
||||
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PD */
|
||||
|
||||
/* USER CODE END PD */
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PM */
|
||||
|
||||
/* USER CODE END PM */
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
|
||||
/* USER CODE BEGIN PV */
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
void SystemClock_Config(void);
|
||||
static void MX_GPIO_Init(void);
|
||||
/* USER CODE BEGIN PFP */
|
||||
|
||||
/* USER CODE END PFP */
|
||||
|
||||
/* Private user code ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/**
|
||||
* @brief The application entry point.
|
||||
* @retval int
|
||||
*/
|
||||
int main(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
||||
/* MCU Configuration--------------------------------------------------------*/
|
||||
|
||||
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
|
||||
HAL_Init();
|
||||
|
||||
/* USER CODE BEGIN Init */
|
||||
|
||||
/* USER CODE END Init */
|
||||
|
||||
if(IS_ENGINEERING_BOOT_MODE())
|
||||
{
|
||||
/* Configure the system clock */
|
||||
SystemClock_Config();
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN SysInit */
|
||||
|
||||
/* USER CODE END SysInit */
|
||||
|
||||
/* Initialize all configured peripherals */
|
||||
MX_GPIO_Init();
|
||||
/* USER CODE BEGIN 2 */
|
||||
|
||||
/* USER CODE END 2 */
|
||||
|
||||
/* Infinite loop */
|
||||
/* USER CODE BEGIN WHILE */
|
||||
while (1)
|
||||
{
|
||||
if(HAL_GPIO_ReadPin(GPIOG, GPIO_PIN_0) == GPIO_PIN_RESET)
|
||||
{
|
||||
HAL_Delay(10);
|
||||
if(HAL_GPIO_ReadPin(GPIOG, GPIO_PIN_0) == GPIO_PIN_RESET)
|
||||
{
|
||||
if(num >= 996 )
|
||||
num = 0;
|
||||
else
|
||||
num++;
|
||||
while(!HAL_GPIO_ReadPin(GPIOG, GPIO_PIN_0));
|
||||
}
|
||||
}
|
||||
if(num % 2 == 0)
|
||||
HAL_GPIO_WritePin(GPIOB, GPIO_PIN_6, GPIO_PIN_RESET);
|
||||
else
|
||||
HAL_GPIO_WritePin(GPIOB, GPIO_PIN_6, GPIO_PIN_SET);
|
||||
/* USER CODE END WHILE */
|
||||
|
||||
/* USER CODE BEGIN 3 */
|
||||
}
|
||||
/* USER CODE END 3 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief System Clock Configuration
|
||||
* @retval None
|
||||
*/
|
||||
void SystemClock_Config(void)
|
||||
{
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
||||
|
||||
/** Initializes the RCC Oscillators according to the specified parameters
|
||||
* in the RCC_OscInitTypeDef structure.
|
||||
*/
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
|
||||
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
|
||||
RCC_OscInitStruct.HSIDivValue = RCC_HSI_DIV1;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
|
||||
RCC_OscInitStruct.PLL2.PLLState = RCC_PLL_NONE;
|
||||
RCC_OscInitStruct.PLL3.PLLState = RCC_PLL_NONE;
|
||||
RCC_OscInitStruct.PLL4.PLLState = RCC_PLL_NONE;
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
/** RCC Clock Config
|
||||
*/
|
||||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_ACLK
|
||||
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2
|
||||
|RCC_CLOCKTYPE_PCLK3|RCC_CLOCKTYPE_PCLK4
|
||||
|RCC_CLOCKTYPE_PCLK5;
|
||||
RCC_ClkInitStruct.AXISSInit.AXI_Clock = RCC_AXISSOURCE_HSI;
|
||||
RCC_ClkInitStruct.AXISSInit.AXI_Div = RCC_AXI_DIV1;
|
||||
RCC_ClkInitStruct.MCUInit.MCU_Clock = RCC_MCUSSOURCE_HSI;
|
||||
RCC_ClkInitStruct.MCUInit.MCU_Div = RCC_MCU_DIV1;
|
||||
RCC_ClkInitStruct.APB4_Div = RCC_APB4_DIV1;
|
||||
RCC_ClkInitStruct.APB5_Div = RCC_APB5_DIV1;
|
||||
RCC_ClkInitStruct.APB1_Div = RCC_APB1_DIV1;
|
||||
RCC_ClkInitStruct.APB2_Div = RCC_APB2_DIV1;
|
||||
RCC_ClkInitStruct.APB3_Div = RCC_APB3_DIV1;
|
||||
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief GPIO Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_GPIO_Init(void)
|
||||
{
|
||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
/* USER CODE BEGIN MX_GPIO_Init_1 */
|
||||
|
||||
/* USER CODE END MX_GPIO_Init_1 */
|
||||
|
||||
/* GPIO Ports Clock Enable */
|
||||
__HAL_RCC_GPIOG_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||
|
||||
/*Configure GPIO pin Output Level */
|
||||
HAL_GPIO_WritePin(GPIOB, GPIO_PIN_6, GPIO_PIN_RESET);
|
||||
|
||||
/*Configure GPIO pin : PG0 */
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_0;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pin : PB6 */
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_6;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||
|
||||
/* USER CODE BEGIN MX_GPIO_Init_2 */
|
||||
|
||||
/* USER CODE END MX_GPIO_Init_2 */
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 4 */
|
||||
|
||||
/* USER CODE END 4 */
|
||||
|
||||
/**
|
||||
* @brief This function is executed in case of error occurrence.
|
||||
* @retval None
|
||||
*/
|
||||
void Error_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN Error_Handler_Debug */
|
||||
/* User can add his own implementation to report the HAL error return state */
|
||||
__disable_irq();
|
||||
while (1)
|
||||
{
|
||||
}
|
||||
/* USER CODE END Error_Handler_Debug */
|
||||
}
|
||||
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief Reports the name of the source file and the source line number
|
||||
* where the assert_param error has occurred.
|
||||
* @param file: pointer to the source file name
|
||||
* @param line: assert_param error line source number
|
||||
* @retval None
|
||||
*/
|
||||
void assert_failed(uint8_t *file, uint32_t line)
|
||||
{
|
||||
/* USER CODE BEGIN 6 */
|
||||
/* User can add his own implementation to report the file name and line number,
|
||||
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
|
||||
/* USER CODE END 6 */
|
||||
}
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
@ -0,0 +1,3 @@
|
||||
635E684B79701B039C64EA45C3F84D30=58DC80C130FF1F8D3F80A6490EE3F57C
|
||||
DC22A860405A8BF2F2C095E5B6529F12=1F098FDD630F96060A5BB9FD2B0116AC
|
||||
eclipse.preferences.version=1
|
||||
@ -0,0 +1,2 @@
|
||||
635E684B79701B039C64EA45C3F84D30=58DC80C130FF1F8D3F80A6490EE3F57C
|
||||
eclipse.preferences.version=1
|
||||
@ -0,0 +1,3 @@
|
||||
635E684B79701B039C64EA45C3F84D30=58DC80C130FF1F8D3F80A6490EE3F57C
|
||||
DC22A860405A8BF2F2C095E5B6529F12=1F098FDD630F96060A5BB9FD2B0116AC
|
||||
eclipse.preferences.version=1
|
||||
@ -0,0 +1,246 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file : main.c
|
||||
* @brief : Main program body
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2025 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PTD */
|
||||
|
||||
/* USER CODE END PTD */
|
||||
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PD */
|
||||
|
||||
/* USER CODE END PD */
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PM */
|
||||
|
||||
/* USER CODE END PM */
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
|
||||
/* USER CODE BEGIN PV */
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
void SystemClock_Config(void);
|
||||
static void MX_GPIO_Init(void);
|
||||
/* USER CODE BEGIN PFP */
|
||||
|
||||
/* USER CODE END PFP */
|
||||
|
||||
/* Private user code ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/**
|
||||
* @brief The application entry point.
|
||||
* @retval int
|
||||
*/
|
||||
int main(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
||||
/* MCU Configuration--------------------------------------------------------*/
|
||||
|
||||
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
|
||||
HAL_Init();
|
||||
|
||||
/* USER CODE BEGIN Init */
|
||||
|
||||
/* USER CODE END Init */
|
||||
|
||||
if(IS_ENGINEERING_BOOT_MODE())
|
||||
{
|
||||
/* Configure the system clock */
|
||||
SystemClock_Config();
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN SysInit */
|
||||
|
||||
/* USER CODE END SysInit */
|
||||
|
||||
/* Initialize all configured peripherals */
|
||||
MX_GPIO_Init();
|
||||
/* USER CODE BEGIN 2 */
|
||||
|
||||
/* USER CODE END 2 */
|
||||
|
||||
/* Infinite loop */
|
||||
/* USER CODE BEGIN WHILE */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE END WHILE */
|
||||
|
||||
/* USER CODE BEGIN 3 */
|
||||
}
|
||||
/* USER CODE END 3 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief System Clock Configuration
|
||||
* @retval None
|
||||
*/
|
||||
void SystemClock_Config(void)
|
||||
{
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
||||
|
||||
/** Initializes the RCC Oscillators according to the specified parameters
|
||||
* in the RCC_OscInitTypeDef structure.
|
||||
*/
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
|
||||
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
|
||||
RCC_OscInitStruct.HSIDivValue = RCC_HSI_DIV1;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
|
||||
RCC_OscInitStruct.PLL2.PLLState = RCC_PLL_NONE;
|
||||
RCC_OscInitStruct.PLL3.PLLState = RCC_PLL_NONE;
|
||||
RCC_OscInitStruct.PLL4.PLLState = RCC_PLL_NONE;
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
/** RCC Clock Config
|
||||
*/
|
||||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_ACLK
|
||||
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2
|
||||
|RCC_CLOCKTYPE_PCLK3|RCC_CLOCKTYPE_PCLK4
|
||||
|RCC_CLOCKTYPE_PCLK5;
|
||||
RCC_ClkInitStruct.AXISSInit.AXI_Clock = RCC_AXISSOURCE_HSI;
|
||||
RCC_ClkInitStruct.AXISSInit.AXI_Div = RCC_AXI_DIV1;
|
||||
RCC_ClkInitStruct.MCUInit.MCU_Clock = RCC_MCUSSOURCE_HSI;
|
||||
RCC_ClkInitStruct.MCUInit.MCU_Div = RCC_MCU_DIV1;
|
||||
RCC_ClkInitStruct.APB4_Div = RCC_APB4_DIV1;
|
||||
RCC_ClkInitStruct.APB5_Div = RCC_APB5_DIV1;
|
||||
RCC_ClkInitStruct.APB1_Div = RCC_APB1_DIV1;
|
||||
RCC_ClkInitStruct.APB2_Div = RCC_APB2_DIV1;
|
||||
RCC_ClkInitStruct.APB3_Div = RCC_APB3_DIV1;
|
||||
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief GPIO Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_GPIO_Init(void)
|
||||
{
|
||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
/* USER CODE BEGIN MX_GPIO_Init_1 */
|
||||
|
||||
/* USER CODE END MX_GPIO_Init_1 */
|
||||
|
||||
/* GPIO Ports Clock Enable */
|
||||
__HAL_RCC_GPIOF_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOC_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOI_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOG_CLK_ENABLE();
|
||||
|
||||
/*Configure GPIO pin Output Level */
|
||||
HAL_GPIO_WritePin(GPIOF, GPIO_PIN_1, GPIO_PIN_RESET);
|
||||
|
||||
/*Configure GPIO pin Output Level */
|
||||
HAL_GPIO_WritePin(GPIOC, GPIO_PIN_7, GPIO_PIN_RESET);
|
||||
|
||||
/*Configure GPIO pin Output Level */
|
||||
HAL_GPIO_WritePin(GPIOI, GPIO_PIN_11|GPIO_PIN_10, GPIO_PIN_RESET);
|
||||
|
||||
/*Configure GPIO pin : PF1 */
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_1;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pin : PC7 */
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_7;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pins : PI11 PI10 */
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_11|GPIO_PIN_10;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
HAL_GPIO_Init(GPIOI, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pin : PG1 */
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_1;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
|
||||
|
||||
/* USER CODE BEGIN MX_GPIO_Init_2 */
|
||||
|
||||
/* USER CODE END MX_GPIO_Init_2 */
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 4 */
|
||||
|
||||
/* USER CODE END 4 */
|
||||
|
||||
/**
|
||||
* @brief This function is executed in case of error occurrence.
|
||||
* @retval None
|
||||
*/
|
||||
void Error_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN Error_Handler_Debug */
|
||||
/* User can add his own implementation to report the HAL error return state */
|
||||
__disable_irq();
|
||||
while (1)
|
||||
{
|
||||
}
|
||||
/* USER CODE END Error_Handler_Debug */
|
||||
}
|
||||
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief Reports the name of the source file and the source line number
|
||||
* where the assert_param error has occurred.
|
||||
* @param file: pointer to the source file name
|
||||
* @param line: assert_param error line source number
|
||||
* @retval None
|
||||
*/
|
||||
void assert_failed(uint8_t *file, uint32_t line)
|
||||
{
|
||||
/* USER CODE BEGIN 6 */
|
||||
/* User can add his own implementation to report the file name and line number,
|
||||
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
|
||||
/* USER CODE END 6 */
|
||||
}
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
@ -0,0 +1,243 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file : main.c
|
||||
* @brief : Main program body
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2025 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PTD */
|
||||
|
||||
/* USER CODE END PTD */
|
||||
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PD */
|
||||
|
||||
/* USER CODE END PD */
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PM */
|
||||
|
||||
/* USER CODE END PM */
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
|
||||
/* USER CODE BEGIN PV */
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
void SystemClock_Config(void);
|
||||
static void MX_GPIO_Init(void);
|
||||
/* USER CODE BEGIN PFP */
|
||||
|
||||
/* USER CODE END PFP */
|
||||
|
||||
/* Private user code ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/**
|
||||
* @brief The application entry point.
|
||||
* @retval int
|
||||
*/
|
||||
int main(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
int num = 0;
|
||||
/* USER CODE END 1 */
|
||||
|
||||
/* MCU Configuration--------------------------------------------------------*/
|
||||
|
||||
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
|
||||
HAL_Init();
|
||||
|
||||
/* USER CODE BEGIN Init */
|
||||
|
||||
/* USER CODE END Init */
|
||||
|
||||
if(IS_ENGINEERING_BOOT_MODE())
|
||||
{
|
||||
/* Configure the system clock */
|
||||
SystemClock_Config();
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN SysInit */
|
||||
|
||||
/* USER CODE END SysInit */
|
||||
|
||||
/* Initialize all configured peripherals */
|
||||
MX_GPIO_Init();
|
||||
/* USER CODE BEGIN 2 */
|
||||
|
||||
/* USER CODE END 2 */
|
||||
|
||||
/* Infinite loop */
|
||||
/* USER CODE BEGIN WHILE */
|
||||
while (1)
|
||||
{
|
||||
if(HAL_GPIO_ReadPin(GPIOG,GPIO_PIN_2) == GPIO_PIN_RESET)
|
||||
{
|
||||
HAL_Delay(10);
|
||||
if(HAL_GPIO_ReadPin(GPIOG,GPIO_PIN_2)==GPIO_PIN_RESET)
|
||||
{
|
||||
if(num>=996)
|
||||
num=0;
|
||||
else
|
||||
num++;
|
||||
while(!HAL_GPIO_ReadPin(GPIOG,GPIO_PIN_2));
|
||||
}
|
||||
}
|
||||
|
||||
if(num%2==0)
|
||||
HAL_GPIO_WritePin(GPIOF,GPIO_PIN_6,GPIO_PIN_RESET);
|
||||
else
|
||||
HAL_GPIO_WritePin(GPIOF,GPIO_PIN_6,GPIO_PIN_SET);
|
||||
|
||||
/* USER CODE END WHILE */
|
||||
|
||||
/* USER CODE BEGIN 3 */
|
||||
}
|
||||
/* USER CODE END 3 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief System Clock Configuration
|
||||
* @retval None
|
||||
*/
|
||||
void SystemClock_Config(void)
|
||||
{
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
||||
|
||||
/** Initializes the RCC Oscillators according to the specified parameters
|
||||
* in the RCC_OscInitTypeDef structure.
|
||||
*/
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
|
||||
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
|
||||
RCC_OscInitStruct.HSIDivValue = RCC_HSI_DIV1;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
|
||||
RCC_OscInitStruct.PLL2.PLLState = RCC_PLL_NONE;
|
||||
RCC_OscInitStruct.PLL3.PLLState = RCC_PLL_NONE;
|
||||
RCC_OscInitStruct.PLL4.PLLState = RCC_PLL_NONE;
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
/** RCC Clock Config
|
||||
*/
|
||||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_ACLK
|
||||
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2
|
||||
|RCC_CLOCKTYPE_PCLK3|RCC_CLOCKTYPE_PCLK4
|
||||
|RCC_CLOCKTYPE_PCLK5;
|
||||
RCC_ClkInitStruct.AXISSInit.AXI_Clock = RCC_AXISSOURCE_HSI;
|
||||
RCC_ClkInitStruct.AXISSInit.AXI_Div = RCC_AXI_DIV1;
|
||||
RCC_ClkInitStruct.MCUInit.MCU_Clock = RCC_MCUSSOURCE_HSI;
|
||||
RCC_ClkInitStruct.MCUInit.MCU_Div = RCC_MCU_DIV1;
|
||||
RCC_ClkInitStruct.APB4_Div = RCC_APB4_DIV1;
|
||||
RCC_ClkInitStruct.APB5_Div = RCC_APB5_DIV1;
|
||||
RCC_ClkInitStruct.APB1_Div = RCC_APB1_DIV1;
|
||||
RCC_ClkInitStruct.APB2_Div = RCC_APB2_DIV1;
|
||||
RCC_ClkInitStruct.APB3_Div = RCC_APB3_DIV1;
|
||||
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief GPIO Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_GPIO_Init(void)
|
||||
{
|
||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
/* USER CODE BEGIN MX_GPIO_Init_1 */
|
||||
|
||||
/* USER CODE END MX_GPIO_Init_1 */
|
||||
|
||||
/* GPIO Ports Clock Enable */
|
||||
__HAL_RCC_GPIOG_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOF_CLK_ENABLE();
|
||||
|
||||
/*Configure GPIO pin Output Level */
|
||||
HAL_GPIO_WritePin(GPIOF, GPIO_PIN_6, GPIO_PIN_RESET);
|
||||
|
||||
/*Configure GPIO pin : PG2 */
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_2;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pin : PF6 */
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_6;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);
|
||||
|
||||
/* USER CODE BEGIN MX_GPIO_Init_2 */
|
||||
|
||||
/* USER CODE END MX_GPIO_Init_2 */
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 4 */
|
||||
|
||||
/* USER CODE END 4 */
|
||||
|
||||
/**
|
||||
* @brief This function is executed in case of error occurrence.
|
||||
* @retval None
|
||||
*/
|
||||
void Error_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN Error_Handler_Debug */
|
||||
/* User can add his own implementation to report the HAL error return state */
|
||||
__disable_irq();
|
||||
while (1)
|
||||
{
|
||||
}
|
||||
/* USER CODE END Error_Handler_Debug */
|
||||
}
|
||||
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief Reports the name of the source file and the source line number
|
||||
* where the assert_param error has occurred.
|
||||
* @param file: pointer to the source file name
|
||||
* @param line: assert_param error line source number
|
||||
* @retval None
|
||||
*/
|
||||
void assert_failed(uint8_t *file, uint32_t line)
|
||||
{
|
||||
/* USER CODE BEGIN 6 */
|
||||
/* User can add his own implementation to report the file name and line number,
|
||||
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
|
||||
/* USER CODE END 6 */
|
||||
}
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
@ -0,0 +1,2 @@
|
||||
635E684B79701B039C64EA45C3F84D30=58DC80C130FF1F8D3F80A6490EE3F57C
|
||||
eclipse.preferences.version=1
|
||||
@ -0,0 +1,224 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file : main.c
|
||||
* @brief : Main program body
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2025 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PTD */
|
||||
|
||||
/* USER CODE END PTD */
|
||||
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PD */
|
||||
|
||||
/* USER CODE END PD */
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PM */
|
||||
|
||||
/* USER CODE END PM */
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
|
||||
/* USER CODE BEGIN PV */
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
void SystemClock_Config(void);
|
||||
static void MX_GPIO_Init(void);
|
||||
/* USER CODE BEGIN PFP */
|
||||
|
||||
/* USER CODE END PFP */
|
||||
|
||||
/* Private user code ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/**
|
||||
* @brief The application entry point.
|
||||
* @retval int
|
||||
*/
|
||||
int main(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
||||
/* MCU Configuration--------------------------------------------------------*/
|
||||
|
||||
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
|
||||
HAL_Init();
|
||||
|
||||
/* USER CODE BEGIN Init */
|
||||
|
||||
/* USER CODE END Init */
|
||||
|
||||
if(IS_ENGINEERING_BOOT_MODE())
|
||||
{
|
||||
/* Configure the system clock */
|
||||
SystemClock_Config();
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN SysInit */
|
||||
|
||||
/* USER CODE END SysInit */
|
||||
|
||||
/* Initialize all configured peripherals */
|
||||
MX_GPIO_Init();
|
||||
/* USER CODE BEGIN 2 */
|
||||
|
||||
/* USER CODE END 2 */
|
||||
|
||||
/* Infinite loop */
|
||||
/* USER CODE BEGIN WHILE */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE END WHILE */
|
||||
|
||||
/* USER CODE BEGIN 3 */
|
||||
}
|
||||
/* USER CODE END 3 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief System Clock Configuration
|
||||
* @retval None
|
||||
*/
|
||||
void SystemClock_Config(void)
|
||||
{
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
||||
|
||||
/** Initializes the RCC Oscillators according to the specified parameters
|
||||
* in the RCC_OscInitTypeDef structure.
|
||||
*/
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
|
||||
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
|
||||
RCC_OscInitStruct.HSIDivValue = RCC_HSI_DIV1;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
|
||||
RCC_OscInitStruct.PLL2.PLLState = RCC_PLL_NONE;
|
||||
RCC_OscInitStruct.PLL3.PLLState = RCC_PLL_NONE;
|
||||
RCC_OscInitStruct.PLL4.PLLState = RCC_PLL_NONE;
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
/** RCC Clock Config
|
||||
*/
|
||||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_ACLK
|
||||
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2
|
||||
|RCC_CLOCKTYPE_PCLK3|RCC_CLOCKTYPE_PCLK4
|
||||
|RCC_CLOCKTYPE_PCLK5;
|
||||
RCC_ClkInitStruct.AXISSInit.AXI_Clock = RCC_AXISSOURCE_HSI;
|
||||
RCC_ClkInitStruct.AXISSInit.AXI_Div = RCC_AXI_DIV1;
|
||||
RCC_ClkInitStruct.MCUInit.MCU_Clock = RCC_MCUSSOURCE_HSI;
|
||||
RCC_ClkInitStruct.MCUInit.MCU_Div = RCC_MCU_DIV1;
|
||||
RCC_ClkInitStruct.APB4_Div = RCC_APB4_DIV1;
|
||||
RCC_ClkInitStruct.APB5_Div = RCC_APB5_DIV1;
|
||||
RCC_ClkInitStruct.APB1_Div = RCC_APB1_DIV1;
|
||||
RCC_ClkInitStruct.APB2_Div = RCC_APB2_DIV1;
|
||||
RCC_ClkInitStruct.APB3_Div = RCC_APB3_DIV1;
|
||||
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief GPIO Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_GPIO_Init(void)
|
||||
{
|
||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
/* USER CODE BEGIN MX_GPIO_Init_1 */
|
||||
|
||||
/* USER CODE END MX_GPIO_Init_1 */
|
||||
|
||||
/* GPIO Ports Clock Enable */
|
||||
__HAL_RCC_GPIOG_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOF_CLK_ENABLE();
|
||||
|
||||
/*Configure GPIO pin Output Level */
|
||||
HAL_GPIO_WritePin(GPIOF, GPIO_PIN_6, GPIO_PIN_RESET);
|
||||
|
||||
/*Configure GPIO pin : PG2 */
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_2;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pin : PF6 */
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_6;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);
|
||||
|
||||
/* USER CODE BEGIN MX_GPIO_Init_2 */
|
||||
|
||||
/* USER CODE END MX_GPIO_Init_2 */
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 4 */
|
||||
|
||||
/* USER CODE END 4 */
|
||||
|
||||
/**
|
||||
* @brief This function is executed in case of error occurrence.
|
||||
* @retval None
|
||||
*/
|
||||
void Error_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN Error_Handler_Debug */
|
||||
/* User can add his own implementation to report the HAL error return state */
|
||||
__disable_irq();
|
||||
while (1)
|
||||
{
|
||||
}
|
||||
/* USER CODE END Error_Handler_Debug */
|
||||
}
|
||||
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief Reports the name of the source file and the source line number
|
||||
* where the assert_param error has occurred.
|
||||
* @param file: pointer to the source file name
|
||||
* @param line: assert_param error line source number
|
||||
* @retval None
|
||||
*/
|
||||
void assert_failed(uint8_t *file, uint32_t line)
|
||||
{
|
||||
/* USER CODE BEGIN 6 */
|
||||
/* User can add his own implementation to report the file name and line number,
|
||||
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
|
||||
/* USER CODE END 6 */
|
||||
}
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
@ -0,0 +1,2 @@
|
||||
66BE74F758C12D739921AEA421D593D3=0
|
||||
eclipse.preferences.version=1
|
||||
@ -0,0 +1,2 @@
|
||||
635E684B79701B039C64EA45C3F84D30=58DC80C130FF1F8D3F80A6490EE3F57C
|
||||
eclipse.preferences.version=1
|
||||
@ -0,0 +1,4 @@
|
||||
2F62501ED4689FB349E356AB974DBE57=58DC80C130FF1F8D3F80A6490EE3F57C
|
||||
635E684B79701B039C64EA45C3F84D30=58DC80C130FF1F8D3F80A6490EE3F57C
|
||||
DC22A860405A8BF2F2C095E5B6529F12=1F098FDD630F96060A5BB9FD2B0116AC
|
||||
eclipse.preferences.version=1
|
||||
@ -0,0 +1,2 @@
|
||||
635E684B79701B039C64EA45C3F84D30=58DC80C130FF1F8D3F80A6490EE3F57C
|
||||
eclipse.preferences.version=1
|
||||
@ -0,0 +1,3 @@
|
||||
635E684B79701B039C64EA45C3F84D30=58DC80C130FF1F8D3F80A6490EE3F57C
|
||||
DC22A860405A8BF2F2C095E5B6529F12=1F098FDD630F96060A5BB9FD2B0116AC
|
||||
eclipse.preferences.version=1
|
||||
@ -0,0 +1,242 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file : main.c
|
||||
* @brief : Main program body
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2025 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PTD */
|
||||
|
||||
/* USER CODE END PTD */
|
||||
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PD */
|
||||
|
||||
/* USER CODE END PD */
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PM */
|
||||
|
||||
/* USER CODE END PM */
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
|
||||
/* USER CODE BEGIN PV */
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
void SystemClock_Config(void);
|
||||
static void MX_GPIO_Init(void);
|
||||
/* USER CODE BEGIN PFP */
|
||||
|
||||
/* USER CODE END PFP */
|
||||
|
||||
/* Private user code ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/**
|
||||
* @brief The application entry point.
|
||||
* @retval int
|
||||
*/
|
||||
int main(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
int num=0;
|
||||
/* USER CODE END 1 */
|
||||
|
||||
/* MCU Configuration--------------------------------------------------------*/
|
||||
|
||||
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
|
||||
HAL_Init();
|
||||
|
||||
/* USER CODE BEGIN Init */
|
||||
|
||||
/* USER CODE END Init */
|
||||
|
||||
if(IS_ENGINEERING_BOOT_MODE())
|
||||
{
|
||||
/* Configure the system clock */
|
||||
SystemClock_Config();
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN SysInit */
|
||||
|
||||
/* USER CODE END SysInit */
|
||||
|
||||
/* Initialize all configured peripherals */
|
||||
MX_GPIO_Init();
|
||||
/* USER CODE BEGIN 2 */
|
||||
|
||||
/* USER CODE END 2 */
|
||||
|
||||
/* Infinite loop */
|
||||
/* USER CODE BEGIN WHILE */
|
||||
while (1)
|
||||
{
|
||||
if(HAL_GPIOReadPin(GPIOE, GPIO_PIN_9) == GPIO_PIN_RESET )
|
||||
{
|
||||
HAL_Delay(10);
|
||||
if(HAL_GPIOReadPin(GPIOE, GPIO_PIN_9) == GPIO_PIN_RESET)
|
||||
{
|
||||
if(num >= 996 )
|
||||
num = 0;
|
||||
else
|
||||
num++;
|
||||
while(!HAL_GPIOReadPin(GPIOE, GPIO_PIN_9));
|
||||
}
|
||||
}
|
||||
|
||||
if(num % 2 == 0)
|
||||
HAL_GPIOWritePin(GPIOC, GPIO_PIN_7, GPIO_PIN_RESET);
|
||||
else
|
||||
HAL_GPIOWritePin(GPIOC, GPIO_PIN_7, GPIO_PIN_SET);
|
||||
/* USER CODE END WHILE */
|
||||
|
||||
/* USER CODE BEGIN 3 */
|
||||
}
|
||||
/* USER CODE END 3 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief System Clock Configuration
|
||||
* @retval None
|
||||
*/
|
||||
void SystemClock_Config(void)
|
||||
{
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
||||
|
||||
/** Initializes the RCC Oscillators according to the specified parameters
|
||||
* in the RCC_OscInitTypeDef structure.
|
||||
*/
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
|
||||
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
|
||||
RCC_OscInitStruct.HSIDivValue = RCC_HSI_DIV1;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
|
||||
RCC_OscInitStruct.PLL2.PLLState = RCC_PLL_NONE;
|
||||
RCC_OscInitStruct.PLL3.PLLState = RCC_PLL_NONE;
|
||||
RCC_OscInitStruct.PLL4.PLLState = RCC_PLL_NONE;
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
/** RCC Clock Config
|
||||
*/
|
||||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_ACLK
|
||||
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2
|
||||
|RCC_CLOCKTYPE_PCLK3|RCC_CLOCKTYPE_PCLK4
|
||||
|RCC_CLOCKTYPE_PCLK5;
|
||||
RCC_ClkInitStruct.AXISSInit.AXI_Clock = RCC_AXISSOURCE_HSI;
|
||||
RCC_ClkInitStruct.AXISSInit.AXI_Div = RCC_AXI_DIV1;
|
||||
RCC_ClkInitStruct.MCUInit.MCU_Clock = RCC_MCUSSOURCE_HSI;
|
||||
RCC_ClkInitStruct.MCUInit.MCU_Div = RCC_MCU_DIV1;
|
||||
RCC_ClkInitStruct.APB4_Div = RCC_APB4_DIV1;
|
||||
RCC_ClkInitStruct.APB5_Div = RCC_APB5_DIV1;
|
||||
RCC_ClkInitStruct.APB1_Div = RCC_APB1_DIV1;
|
||||
RCC_ClkInitStruct.APB2_Div = RCC_APB2_DIV1;
|
||||
RCC_ClkInitStruct.APB3_Div = RCC_APB3_DIV1;
|
||||
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief GPIO Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_GPIO_Init(void)
|
||||
{
|
||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
/* USER CODE BEGIN MX_GPIO_Init_1 */
|
||||
|
||||
/* USER CODE END MX_GPIO_Init_1 */
|
||||
|
||||
/* GPIO Ports Clock Enable */
|
||||
__HAL_RCC_GPIOC_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOE_CLK_ENABLE();
|
||||
|
||||
/*Configure GPIO pin Output Level */
|
||||
HAL_GPIO_WritePin(GPIOC, GPIO_PIN_7, GPIO_PIN_RESET);
|
||||
|
||||
/*Configure GPIO pin : PC7 */
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_7;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pin : PE9 */
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_9;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
|
||||
|
||||
/* USER CODE BEGIN MX_GPIO_Init_2 */
|
||||
|
||||
/* USER CODE END MX_GPIO_Init_2 */
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 4 */
|
||||
|
||||
/* USER CODE END 4 */
|
||||
|
||||
/**
|
||||
* @brief This function is executed in case of error occurrence.
|
||||
* @retval None
|
||||
*/
|
||||
void Error_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN Error_Handler_Debug */
|
||||
/* User can add his own implementation to report the HAL error return state */
|
||||
__disable_irq();
|
||||
while (1)
|
||||
{
|
||||
}
|
||||
/* USER CODE END Error_Handler_Debug */
|
||||
}
|
||||
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief Reports the name of the source file and the source line number
|
||||
* where the assert_param error has occurred.
|
||||
* @param file: pointer to the source file name
|
||||
* @param line: assert_param error line source number
|
||||
* @retval None
|
||||
*/
|
||||
void assert_failed(uint8_t *file, uint32_t line)
|
||||
{
|
||||
/* USER CODE BEGIN 6 */
|
||||
/* User can add his own implementation to report the file name and line number,
|
||||
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
|
||||
/* USER CODE END 6 */
|
||||
}
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
@ -0,0 +1,4 @@
|
||||
2F62501ED4689FB349E356AB974DBE57=58DC80C130FF1F8D3F80A6490EE3F57C
|
||||
635E684B79701B039C64EA45C3F84D30=58DC80C130FF1F8D3F80A6490EE3F57C
|
||||
DC22A860405A8BF2F2C095E5B6529F12=1F098FDD630F96060A5BB9FD2B0116AC
|
||||
eclipse.preferences.version=1
|
||||
@ -0,0 +1,3 @@
|
||||
635E684B79701B039C64EA45C3F84D30=58DC80C130FF1F8D3F80A6490EE3F57C
|
||||
DC22A860405A8BF2F2C095E5B6529F12=1F098FDD630F96060A5BB9FD2B0116AC
|
||||
eclipse.preferences.version=1
|
||||
@ -0,0 +1,288 @@
|
||||
徽标
|
||||
工单管理
|
||||
合并请求
|
||||
里程碑
|
||||
探索
|
||||
zibright
|
||||
/
|
||||
STM32
|
||||
代码
|
||||
工单
|
||||
合并请求
|
||||
Actions
|
||||
软件包
|
||||
项目
|
||||
版本发布
|
||||
百科
|
||||
动态
|
||||
设置
|
||||
STM32
|
||||
/
|
||||
STM32MP157AAA3
|
||||
/
|
||||
Cortex-M4 3-4
|
||||
/
|
||||
CM4
|
||||
/
|
||||
Core
|
||||
/
|
||||
Src
|
||||
/
|
||||
main.c
|
||||
zibright
|
||||
zibright
|
||||
9e3668d6de
|
||||
rename
|
||||
1小时前
|
||||
241 行
|
||||
6.2 KiB
|
||||
C
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file : main.c
|
||||
* @brief : Main program body
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2025 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PTD */
|
||||
|
||||
/* USER CODE END PTD */
|
||||
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PD */
|
||||
|
||||
/* USER CODE END PD */
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PM */
|
||||
|
||||
/* USER CODE END PM */
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
|
||||
/* USER CODE BEGIN PV */
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
void SystemClock_Config(void);
|
||||
static void MX_GPIO_Init(void);
|
||||
/* USER CODE BEGIN PFP */
|
||||
|
||||
/* USER CODE END PFP */
|
||||
|
||||
/* Private user code ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/**
|
||||
* @brief The application entry point.
|
||||
* @retval int
|
||||
*/
|
||||
int main(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
int num=0;
|
||||
/* USER CODE END 1 */
|
||||
|
||||
/* MCU Configuration--------------------------------------------------------*/
|
||||
|
||||
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
|
||||
HAL_Init();
|
||||
|
||||
/* USER CODE BEGIN Init */
|
||||
|
||||
/* USER CODE END Init */
|
||||
|
||||
if(IS_ENGINEERING_BOOT_MODE())
|
||||
{
|
||||
/* Configure the system clock */
|
||||
SystemClock_Config();
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN SysInit */
|
||||
|
||||
/* USER CODE END SysInit */
|
||||
|
||||
/* Initialize all configured peripherals */
|
||||
MX_GPIO_Init();
|
||||
/* USER CODE BEGIN 2 */
|
||||
|
||||
/* USER CODE END 2 */
|
||||
|
||||
/* Infinite loop */
|
||||
/* USER CODE BEGIN WHILE */
|
||||
while (1)
|
||||
{
|
||||
if(HAL_GPIO_ReadPin(GPIOG,GPIO_PIN_2)==GPIO_PIN_RESET)
|
||||
{
|
||||
num++;
|
||||
if(num%2==0)
|
||||
{
|
||||
HAL_GPIO_WritePin(GPIOF,GPIO_PIN_6,GPIO_PIN_RESET);
|
||||
|
||||
}
|
||||
|
||||
else
|
||||
{
|
||||
HAL_GPIO_WritePin(GPIOF,GPIO_PIN_6,GPIO_PIN_SET);
|
||||
|
||||
}
|
||||
|
||||
}
|
||||
/* USER CODE END WHILE */
|
||||
|
||||
/* USER CODE BEGIN 3 */
|
||||
}
|
||||
/* USER CODE END 3 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief System Clock Configuration
|
||||
* @retval None
|
||||
*/
|
||||
void SystemClock_Config(void)
|
||||
{
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
||||
|
||||
/** Initializes the RCC Oscillators according to the specified parameters
|
||||
* in the RCC_OscInitTypeDef structure.
|
||||
*/
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
|
||||
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
|
||||
RCC_OscInitStruct.HSIDivValue = RCC_HSI_DIV1;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
|
||||
RCC_OscInitStruct.PLL2.PLLState = RCC_PLL_NONE;
|
||||
RCC_OscInitStruct.PLL3.PLLState = RCC_PLL_NONE;
|
||||
RCC_OscInitStruct.PLL4.PLLState = RCC_PLL_NONE;
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
/** RCC Clock Config
|
||||
*/
|
||||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_ACLK
|
||||
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2
|
||||
|RCC_CLOCKTYPE_PCLK3|RCC_CLOCKTYPE_PCLK4
|
||||
|RCC_CLOCKTYPE_PCLK5;
|
||||
RCC_ClkInitStruct.AXISSInit.AXI_Clock = RCC_AXISSOURCE_HSI;
|
||||
RCC_ClkInitStruct.AXISSInit.AXI_Div = RCC_AXI_DIV1;
|
||||
RCC_ClkInitStruct.MCUInit.MCU_Clock = RCC_MCUSSOURCE_HSI;
|
||||
RCC_ClkInitStruct.MCUInit.MCU_Div = RCC_MCU_DIV1;
|
||||
RCC_ClkInitStruct.APB4_Div = RCC_APB4_DIV1;
|
||||
RCC_ClkInitStruct.APB5_Div = RCC_APB5_DIV1;
|
||||
RCC_ClkInitStruct.APB1_Div = RCC_APB1_DIV1;
|
||||
RCC_ClkInitStruct.APB2_Div = RCC_APB2_DIV1;
|
||||
RCC_ClkInitStruct.APB3_Div = RCC_APB3_DIV1;
|
||||
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief GPIO Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_GPIO_Init(void)
|
||||
{
|
||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
/* USER CODE BEGIN MX_GPIO_Init_1 */
|
||||
|
||||
/* USER CODE END MX_GPIO_Init_1 */
|
||||
|
||||
/* GPIO Ports Clock Enable */
|
||||
__HAL_RCC_GPIOG_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOF_CLK_ENABLE();
|
||||
|
||||
/*Configure GPIO pin Output Level */
|
||||
HAL_GPIO_WritePin(GPIOF, GPIO_PIN_6, GPIO_PIN_RESET);
|
||||
|
||||
/*Configure GPIO pin : PG2 */
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_2;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pin : PF6 */
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_6;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);
|
||||
|
||||
/* USER CODE BEGIN MX_GPIO_Init_2 */
|
||||
|
||||
/* USER CODE END MX_GPIO_Init_2 */
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 4 */
|
||||
|
||||
/* USER CODE END 4 */
|
||||
|
||||
/**
|
||||
* @brief This function is executed in case of error occurrence.
|
||||
* @retval None
|
||||
*/
|
||||
void Error_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN Error_Handler_Debug */
|
||||
/* User can add his own implementation to report the HAL error return state */
|
||||
__disable_irq();
|
||||
while (1)
|
||||
{
|
||||
}
|
||||
/* USER CODE END Error_Handler_Debug */
|
||||
}
|
||||
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief Reports the name of the source file and the source line number
|
||||
* where the assert_param error has occurred.
|
||||
* @param file: pointer to the source file name
|
||||
* @param line: assert_param error line source number
|
||||
* @retval None
|
||||
*/
|
||||
void assert_failed(uint8_t *file, uint32_t line)
|
||||
{
|
||||
/* USER CODE BEGIN 6 */
|
||||
/* User can add his own implementation to report the file name and line number,
|
||||
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
|
||||
/* USER CODE END 6 */
|
||||
}
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
Powered by Gitea
|
||||
当前版本:
|
||||
development
|
||||
页面:
|
||||
69ms
|
||||
模板:
|
||||
5ms
|
||||
许可证
|
||||
API
|
||||
@ -0,0 +1,242 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file : main.c
|
||||
* @brief : Main program body
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2025 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PTD */
|
||||
|
||||
/* USER CODE END PTD */
|
||||
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PD */
|
||||
|
||||
/* USER CODE END PD */
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PM */
|
||||
|
||||
/* USER CODE END PM */
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
|
||||
/* USER CODE BEGIN PV */
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
void SystemClock_Config(void);
|
||||
static void MX_GPIO_Init(void);
|
||||
/* USER CODE BEGIN PFP */
|
||||
|
||||
/* USER CODE END PFP */
|
||||
|
||||
/* Private user code ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/**
|
||||
* @brief The application entry point.
|
||||
* @retval int
|
||||
*/
|
||||
int main(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
int num=0;
|
||||
/* USER CODE END 1 */
|
||||
|
||||
/* MCU Configuration--------------------------------------------------------*/
|
||||
|
||||
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
|
||||
HAL_Init();
|
||||
|
||||
/* USER CODE BEGIN Init */
|
||||
|
||||
/* USER CODE END Init */
|
||||
|
||||
if(IS_ENGINEERING_BOOT_MODE())
|
||||
{
|
||||
/* Configure the system clock */
|
||||
SystemClock_Config();
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN SysInit */
|
||||
|
||||
/* USER CODE END SysInit */
|
||||
|
||||
/* Initialize all configured peripherals */
|
||||
MX_GPIO_Init();
|
||||
/* USER CODE BEGIN 2 */
|
||||
|
||||
/* USER CODE END 2 */
|
||||
|
||||
/* Infinite loop */
|
||||
/* USER CODE BEGIN WHILE */
|
||||
while (1)
|
||||
{
|
||||
if(HAL_GPIO_ReadPin(GPIOE, GPIO_PIN_9) == GPIO_PIN_RESET )
|
||||
{
|
||||
HAL_Delay(10);
|
||||
if(HAL_GPIO_ReadPin(GPIOE, GPIO_PIN_9) == GPIO_PIN_RESET)
|
||||
{
|
||||
if(num >= 996 )
|
||||
num = 0;
|
||||
else
|
||||
num++;
|
||||
while(!HAL_GPIO_ReadPin(GPIOE, GPIO_PIN_9));
|
||||
}
|
||||
}
|
||||
|
||||
if(num % 2 == 0)
|
||||
HAL_GPIO_WritePin(GPIOC, GPIO_PIN_7, GPIO_PIN_RESET);
|
||||
else
|
||||
HAL_GPIO_WritePin(GPIOC, GPIO_PIN_7, GPIO_PIN_SET);
|
||||
/* USER CODE END WHILE */
|
||||
|
||||
/* USER CODE BEGIN 3 */
|
||||
}
|
||||
/* USER CODE END 3 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief System Clock Configuration
|
||||
* @retval None
|
||||
*/
|
||||
void SystemClock_Config(void)
|
||||
{
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
||||
|
||||
/** Initializes the RCC Oscillators according to the specified parameters
|
||||
* in the RCC_OscInitTypeDef structure.
|
||||
*/
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
|
||||
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
|
||||
RCC_OscInitStruct.HSIDivValue = RCC_HSI_DIV1;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
|
||||
RCC_OscInitStruct.PLL2.PLLState = RCC_PLL_NONE;
|
||||
RCC_OscInitStruct.PLL3.PLLState = RCC_PLL_NONE;
|
||||
RCC_OscInitStruct.PLL4.PLLState = RCC_PLL_NONE;
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
/** RCC Clock Config
|
||||
*/
|
||||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_ACLK
|
||||
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2
|
||||
|RCC_CLOCKTYPE_PCLK3|RCC_CLOCKTYPE_PCLK4
|
||||
|RCC_CLOCKTYPE_PCLK5;
|
||||
RCC_ClkInitStruct.AXISSInit.AXI_Clock = RCC_AXISSOURCE_HSI;
|
||||
RCC_ClkInitStruct.AXISSInit.AXI_Div = RCC_AXI_DIV1;
|
||||
RCC_ClkInitStruct.MCUInit.MCU_Clock = RCC_MCUSSOURCE_HSI;
|
||||
RCC_ClkInitStruct.MCUInit.MCU_Div = RCC_MCU_DIV1;
|
||||
RCC_ClkInitStruct.APB4_Div = RCC_APB4_DIV1;
|
||||
RCC_ClkInitStruct.APB5_Div = RCC_APB5_DIV1;
|
||||
RCC_ClkInitStruct.APB1_Div = RCC_APB1_DIV1;
|
||||
RCC_ClkInitStruct.APB2_Div = RCC_APB2_DIV1;
|
||||
RCC_ClkInitStruct.APB3_Div = RCC_APB3_DIV1;
|
||||
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief GPIO Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_GPIO_Init(void)
|
||||
{
|
||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
/* USER CODE BEGIN MX_GPIO_Init_1 */
|
||||
|
||||
/* USER CODE END MX_GPIO_Init_1 */
|
||||
|
||||
/* GPIO Ports Clock Enable */
|
||||
__HAL_RCC_GPIOC_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOE_CLK_ENABLE();
|
||||
|
||||
/*Configure GPIO pin Output Level */
|
||||
HAL_GPIO_WritePin(GPIOC, GPIO_PIN_7, GPIO_PIN_RESET);
|
||||
|
||||
/*Configure GPIO pin : PC7 */
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_7;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pin : PE9 */
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_9;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
|
||||
|
||||
/* USER CODE BEGIN MX_GPIO_Init_2 */
|
||||
|
||||
/* USER CODE END MX_GPIO_Init_2 */
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 4 */
|
||||
|
||||
/* USER CODE END 4 */
|
||||
|
||||
/**
|
||||
* @brief This function is executed in case of error occurrence.
|
||||
* @retval None
|
||||
*/
|
||||
void Error_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN Error_Handler_Debug */
|
||||
/* User can add his own implementation to report the HAL error return state */
|
||||
__disable_irq();
|
||||
while (1)
|
||||
{
|
||||
}
|
||||
/* USER CODE END Error_Handler_Debug */
|
||||
}
|
||||
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief Reports the name of the source file and the source line number
|
||||
* where the assert_param error has occurred.
|
||||
* @param file: pointer to the source file name
|
||||
* @param line: assert_param error line source number
|
||||
* @retval None
|
||||
*/
|
||||
void assert_failed(uint8_t *file, uint32_t line)
|
||||
{
|
||||
/* USER CODE BEGIN 6 */
|
||||
/* User can add his own implementation to report the file name and line number,
|
||||
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
|
||||
/* USER CODE END 6 */
|
||||
}
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
@ -0,0 +1,4 @@
|
||||
2F62501ED4689FB349E356AB974DBE57=58DC80C130FF1F8D3F80A6490EE3F57C
|
||||
635E684B79701B039C64EA45C3F84D30=58DC80C130FF1F8D3F80A6490EE3F57C
|
||||
DC22A860405A8BF2F2C095E5B6529F12=1F098FDD630F96060A5BB9FD2B0116AC
|
||||
eclipse.preferences.version=1
|
||||
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
@ -0,0 +1 @@
|
||||
|
||||
Binary file not shown.
@ -0,0 +1 @@
|
||||
|
||||
Binary file not shown.
Binary file not shown.
@ -0,0 +1,7 @@
|
||||
DeviceConfigurationTool.AskToSwitchToCPerspectiveOnCodeGeneration=false
|
||||
DeviceConfigurationTool.AskToSwitchToCdtPerspective=false
|
||||
DeviceConfigurationTool.AskToSwitchToCubeMxPerspective=false
|
||||
DeviceConfigurationTool.SwitchToCPerspectiveOnCodeGeneration=true
|
||||
DeviceConfigurationTool.SwitchToCdtPerspective=true
|
||||
DeviceConfigurationTool.SwitchToCubeMxPerspective=true
|
||||
eclipse.preferences.version=1
|
||||
@ -0,0 +1,2 @@
|
||||
eclipse.preferences.version=1
|
||||
project_presentation/setHierarchicalMode=false
|
||||
@ -0,0 +1,16 @@
|
||||
eclipse.preferences.version=1
|
||||
indexer/indexAllFiles=true
|
||||
indexer/indexAllHeaderVersions=false
|
||||
indexer/indexImportLocation=.settings/cdt-index.zip
|
||||
indexer/indexOnOpen=false
|
||||
indexer/indexUnusedHeadersWithAlternateLang=false
|
||||
indexer/indexUnusedHeadersWithDefaultLang=true
|
||||
indexer/indexerId=org.eclipse.cdt.core.fastIndexer
|
||||
indexer/preferenceScope=1
|
||||
indexer/skipFilesLargerThanMB=8
|
||||
indexer/skipImplicitReferences=false
|
||||
indexer/skipIncludedFilesLargerThanMB=16
|
||||
indexer/skipMacroReferences=false
|
||||
indexer/skipReferences=false
|
||||
indexer/skipTypeReferences=false
|
||||
indexer/useHeuristicIncludeResolution=true
|
||||
@ -0,0 +1,16 @@
|
||||
eclipse.preferences.version=1
|
||||
indexer/indexAllFiles=true
|
||||
indexer/indexAllHeaderVersions=false
|
||||
indexer/indexImportLocation=.settings/cdt-index.zip
|
||||
indexer/indexOnOpen=false
|
||||
indexer/indexUnusedHeadersWithAlternateLang=false
|
||||
indexer/indexUnusedHeadersWithDefaultLang=false
|
||||
indexer/indexerId=org.eclipse.cdt.core.fastIndexer
|
||||
indexer/preferenceScope=1
|
||||
indexer/skipFilesLargerThanMB=8
|
||||
indexer/skipImplicitReferences=false
|
||||
indexer/skipIncludedFilesLargerThanMB=16
|
||||
indexer/skipMacroReferences=false
|
||||
indexer/skipReferences=false
|
||||
indexer/skipTypeReferences=false
|
||||
indexer/useHeuristicIncludeResolution=true
|
||||
@ -0,0 +1,16 @@
|
||||
eclipse.preferences.version=1
|
||||
indexer/indexAllFiles=true
|
||||
indexer/indexAllHeaderVersions=false
|
||||
indexer/indexImportLocation=.settings/cdt-index.zip
|
||||
indexer/indexOnOpen=false
|
||||
indexer/indexUnusedHeadersWithAlternateLang=false
|
||||
indexer/indexUnusedHeadersWithDefaultLang=false
|
||||
indexer/indexerId=org.eclipse.cdt.core.fastIndexer
|
||||
indexer/preferenceScope=1
|
||||
indexer/skipFilesLargerThanMB=8
|
||||
indexer/skipImplicitReferences=false
|
||||
indexer/skipIncludedFilesLargerThanMB=16
|
||||
indexer/skipMacroReferences=false
|
||||
indexer/skipReferences=false
|
||||
indexer/skipTypeReferences=false
|
||||
indexer/useHeuristicIncludeResolution=true
|
||||
@ -0,0 +1,16 @@
|
||||
eclipse.preferences.version=1
|
||||
indexer/indexAllFiles=true
|
||||
indexer/indexAllHeaderVersions=false
|
||||
indexer/indexImportLocation=.settings/cdt-index.zip
|
||||
indexer/indexOnOpen=false
|
||||
indexer/indexUnusedHeadersWithAlternateLang=false
|
||||
indexer/indexUnusedHeadersWithDefaultLang=false
|
||||
indexer/indexerId=org.eclipse.cdt.core.fastIndexer
|
||||
indexer/preferenceScope=1
|
||||
indexer/skipFilesLargerThanMB=8
|
||||
indexer/skipImplicitReferences=false
|
||||
indexer/skipIncludedFilesLargerThanMB=16
|
||||
indexer/skipMacroReferences=false
|
||||
indexer/skipReferences=false
|
||||
indexer/skipTypeReferences=false
|
||||
indexer/useHeuristicIncludeResolution=true
|
||||
@ -0,0 +1,16 @@
|
||||
eclipse.preferences.version=1
|
||||
indexer/indexAllFiles=true
|
||||
indexer/indexAllHeaderVersions=false
|
||||
indexer/indexImportLocation=.settings/cdt-index.zip
|
||||
indexer/indexOnOpen=false
|
||||
indexer/indexUnusedHeadersWithAlternateLang=false
|
||||
indexer/indexUnusedHeadersWithDefaultLang=false
|
||||
indexer/indexerId=org.eclipse.cdt.core.fastIndexer
|
||||
indexer/preferenceScope=1
|
||||
indexer/skipFilesLargerThanMB=8
|
||||
indexer/skipImplicitReferences=false
|
||||
indexer/skipIncludedFilesLargerThanMB=16
|
||||
indexer/skipMacroReferences=false
|
||||
indexer/skipReferences=false
|
||||
indexer/skipTypeReferences=false
|
||||
indexer/useHeuristicIncludeResolution=true
|
||||
@ -0,0 +1,16 @@
|
||||
eclipse.preferences.version=1
|
||||
indexer/indexAllFiles=true
|
||||
indexer/indexAllHeaderVersions=false
|
||||
indexer/indexImportLocation=.settings/cdt-index.zip
|
||||
indexer/indexOnOpen=false
|
||||
indexer/indexUnusedHeadersWithAlternateLang=false
|
||||
indexer/indexUnusedHeadersWithDefaultLang=false
|
||||
indexer/indexerId=org.eclipse.cdt.core.fastIndexer
|
||||
indexer/preferenceScope=1
|
||||
indexer/skipFilesLargerThanMB=8
|
||||
indexer/skipImplicitReferences=false
|
||||
indexer/skipIncludedFilesLargerThanMB=16
|
||||
indexer/skipMacroReferences=false
|
||||
indexer/skipReferences=false
|
||||
indexer/skipTypeReferences=false
|
||||
indexer/useHeuristicIncludeResolution=true
|
||||
@ -0,0 +1,16 @@
|
||||
eclipse.preferences.version=1
|
||||
indexer/indexAllFiles=true
|
||||
indexer/indexAllHeaderVersions=false
|
||||
indexer/indexImportLocation=.settings/cdt-index.zip
|
||||
indexer/indexOnOpen=false
|
||||
indexer/indexUnusedHeadersWithAlternateLang=false
|
||||
indexer/indexUnusedHeadersWithDefaultLang=false
|
||||
indexer/indexerId=org.eclipse.cdt.core.fastIndexer
|
||||
indexer/preferenceScope=1
|
||||
indexer/skipFilesLargerThanMB=8
|
||||
indexer/skipImplicitReferences=false
|
||||
indexer/skipIncludedFilesLargerThanMB=16
|
||||
indexer/skipMacroReferences=false
|
||||
indexer/skipReferences=false
|
||||
indexer/skipTypeReferences=false
|
||||
indexer/useHeuristicIncludeResolution=true
|
||||
@ -0,0 +1,16 @@
|
||||
eclipse.preferences.version=1
|
||||
indexer/indexAllFiles=true
|
||||
indexer/indexAllHeaderVersions=false
|
||||
indexer/indexImportLocation=.settings/cdt-index.zip
|
||||
indexer/indexOnOpen=false
|
||||
indexer/indexUnusedHeadersWithAlternateLang=false
|
||||
indexer/indexUnusedHeadersWithDefaultLang=false
|
||||
indexer/indexerId=org.eclipse.cdt.core.fastIndexer
|
||||
indexer/preferenceScope=1
|
||||
indexer/skipFilesLargerThanMB=8
|
||||
indexer/skipImplicitReferences=false
|
||||
indexer/skipIncludedFilesLargerThanMB=16
|
||||
indexer/skipMacroReferences=false
|
||||
indexer/skipReferences=false
|
||||
indexer/skipTypeReferences=false
|
||||
indexer/useHeuristicIncludeResolution=true
|
||||
@ -0,0 +1,2 @@
|
||||
eclipse.preferences.version=1
|
||||
org.eclipse.cdt.debug.core.cDebug.default_source_containers=<?xml version\="1.0" encoding\="UTF-8" standalone\="no"?>\r\n<sourceLookupDirector>\r\n <sourceContainers duplicates\="false">\r\n <container memento\="AbsolutePath" typeId\="org.eclipse.cdt.debug.core.containerType.absolutePath"/>\r\n <container memento\="programRelativePath" typeId\="org.eclipse.cdt.debug.core.containerType.programRelativePath"/>\r\n <container memento\="<?xml version\="1.0" encoding\="UTF-8" standalone\="no"?>&\#13;&\#10;<project referencedProjects\="true"/>&\#13;&\#10;" typeId\="org.eclipse.cdt.debug.core.containerType.project"/>\r\n </sourceContainers>\r\n</sourceLookupDirector>\r\n
|
||||
@ -0,0 +1,2 @@
|
||||
eclipse.preferences.version=1
|
||||
useAnnotationsPrefPage=true
|
||||
@ -0,0 +1,9 @@
|
||||
eclipse.preferences.version=1
|
||||
properties/Cortex-M4\ 3-1_CM4.null.256074199/com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.136522259=com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.136522259\=rcState\\\=0\\r\\nrebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.archiver.2012647683\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.1708809653\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.1278855870\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.534445718\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.756233475\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker.921038711\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.binary.54372455\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.hex.1928599359\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.srec.1542791994\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.symbolsrec.1699067832\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.verilog.260807020\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objdump.listfile.246014016\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.size.1938640038\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.exe.debug.729428566\=rebuildState\\\=false\\r\\n\r\n
|
||||
properties/Cortex-M4\ 3-1_CM4.null.256074199/com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1583606935=com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.archiver.1864563805\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.130999520\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.1725377343\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.1615172179\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.2109503125\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker.126069251\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.binary.42725794\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.hex.858628196\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.srec.346545435\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.symbolsrec.1843204852\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.verilog.9312632\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objdump.listfile.217876545\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.size.994648747\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.exe.release.970403097\=rebuildState\\\=true\\r\\n\r\n
|
||||
properties/Cortex-M4\ 3-2_CM4.null.1751611289/com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.1018305035=com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.1018305035\=rcState\\\=0\\r\\nrebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.archiver.1852380657\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.725644674\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.748193277\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.1631309839\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.1422940893\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker.1734198838\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.binary.875576689\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.hex.225290547\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.srec.187747178\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.symbolsrec.878326961\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.verilog.523827948\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objdump.listfile.893513140\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.size.1564960143\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.exe.debug.913564635\=rebuildState\\\=false\\r\\n\r\n
|
||||
properties/Cortex-M4\ 3-2_CM4.null.1751611289/com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1182569280=com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.archiver.992902805\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.1692149404\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.1428588749\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.1618184964\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.890276533\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker.713391829\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.binary.695011360\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.hex.2124466539\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.srec.1089653934\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.symbolsrec.379284352\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.verilog.195555821\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objdump.listfile.1217726827\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.size.1057409394\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.exe.release.1241007996\=rebuildState\\\=true\\r\\n\r\n
|
||||
properties/Cortex-M4\ 3-3_CM4.null.2141158450/com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.1372994750=com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.1372994750\=rcState\\\=0\\r\\nrebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.archiver.1623128463\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.170377977\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.432481340\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.2063588376\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.406256653\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker.1706787330\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.binary.417571278\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.hex.964559921\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.srec.1643443949\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.symbolsrec.541105916\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.verilog.1036697432\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objdump.listfile.202941512\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.size.169945197\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.exe.debug.309663247\=rebuildState\\\=false\\r\\n\r\n
|
||||
properties/Cortex-M4\ 3-3_CM4.null.2141158450/com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1321632159=com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.archiver.1719202648\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.76483728\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.1688659271\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.2111936067\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.236335390\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker.1640337369\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.binary.38612596\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.hex.685720789\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.srec.880161836\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.symbolsrec.1258962406\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.verilog.634773451\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objdump.listfile.826559486\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.size.2124264382\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.exe.release.886358204\=rebuildState\\\=true\\r\\n\r\n
|
||||
properties/Cortex-M4\ 3-4_CM4.null.285319200/com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.304258451=com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.304258451\=rcState\\\=0\\r\\nrebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.archiver.750929864\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.566055884\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.1469992731\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.301688159\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.2108569736\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker.1880614984\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.binary.2124858062\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.hex.1782338858\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.srec.993795002\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.symbolsrec.340360708\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.verilog.1663771220\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objdump.listfile.230789652\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.size.1910179362\=rebuildState\\\=false\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.exe.debug.1334514139\=rebuildState\\\=false\\r\\n\r\n
|
||||
properties/Cortex-M4\ 3-4_CM4.null.285319200/com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.release.1151999367=com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.archiver.910795574\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.2094675508\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.1931577900\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.969288151\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.1476019737\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.linker.1773207312\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.binary.416150709\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.hex.1452602335\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.srec.1281164459\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.symbolsrec.975367558\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objcopy.verilog.1542818052\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.objdump.listfile.52906748\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.tool.size.395892132\=rebuildState\\\=true\\r\\n\r\ncom.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.exe.release.787286817\=rebuildState\\\=true\\r\\n\r\n
|
||||
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in New Issue
Block a user